This is killing me! I have spent almost all this session struggling with connectivity-issues. It was like 5 hours ago that I tried to contact after hours support but still no answers.
This is my last week before my first lab attempt. I have scheduled a bunch of lab sessions and I dont have time for this type of problems. I know that its early morning in the US but isn´t that why there is an "after hours support" that should be available? /J 2010/7/5 Jimmy Larsson <[email protected]> > Breaking news! > > As the very moment that I start wireshark on the ACS pings gets thru! There > is definately something weird going on in vmware! > > /J > > 2010/7/5 Jimmy Larsson <[email protected]> > > Now I have the same issue with ACS. >> >> ACS -> Cat3 fa0/14 -> VLAN 50 -> Cat3 fa0/5 -> R5 fa0/1 >> >> C:\Documents and Settings\Administrator>ipconfig >> >> Windows IP Configuration >> >> >> Ethernet adapter Student NIC - ok to change - watch routes!: >> >> Connection-specific DNS Suffix . : >> IP Address. . . . . . . . . . . . : 10.10.50.100 >> Subnet Mask . . . . . . . . . . . : 255.255.255.0 >> Default Gateway . . . . . . . . . : >> >> Ethernet adapter OUTSIDE NIC - DO NOT CHANGE!!!: >> >> Connection-specific DNS Suffix . : ipexpert.com >> IP Address. . . . . . . . . . . . : 10.200.5.201 >> Subnet Mask . . . . . . . . . . . : 255.255.255.0 >> Default Gateway . . . . . . . . . : 10.200.5.254 >> >> C:\Documents and Settings\Administrator> >> >> ------------ >> >> >> Cat3#sh run int fa0/14 >> Building configuration... >> >> Current configuration : 109 bytes >> ! >> interface FastEthernet0/14 >> switchport access vlan 50 >> switchport mode access >> spanning-tree portfast >> end >> >> Cat3# >> >> >> ------------ >> >> R5#sh cdp nei >> Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge >> S - Switch, H - Host, I - IGMP, r - Repeater >> >> Device ID Local Intrfce Holdtme Capability Platform Port >> ID >> Cat3 Fas 0/1 166 R S I WS-C3560- Fas >> 0/5 >> CAT1 Fas 0/0 164 R S I WS-C3550- Fas >> 0/5 >> R5#sh run int fa0/1 >> Building configuration... >> >> Current configuration : 95 bytes >> ! >> interface FastEthernet0/1 >> ip address 10.10.50.5 255.255.255.0 >> duplex auto >> speed auto >> end >> >> R5# >> >> -------------- >> >> Cat3#sh run int fa0/5 >> Building configuration... >> >> Current configuration : 108 bytes >> ! >> interface FastEthernet0/5 >> switchport access vlan 50 >> switchport mode access >> spanning-tree portfast >> end >> >> Cat3# >> Cat3#sh vlan | incl VLAN0050 >> 50 VLAN0050 active Fa0/5, Fa0/14 >> Cat3# >> Cat3#sh mac address-table dynamic vlan 50 >> Mac Address Table >> ------------------------------------------- >> >> Vlan Mac Address Type Ports >> ---- ----------- -------- ----- >> 50 000c.295a.1321 DYNAMIC Fa0/14 >> 50 001b.d50f.f359 DYNAMIC Fa0/5 >> Total Mac Addresses for this criterion: 2 >> Cat3# >> >> ------------ >> R5#sh arp >> Protocol Address Age (min) Hardware Addr Type Interface >> Internet 10.10.50.5 - 001b.d50f.f359 ARPA >> FastEthernet0/1 >> Internet 10.10.50.100 0 000c.295a.1321 ARPA >> FastEthernet0/1 >> Internet 10.10.51.5 - 001b.d50f.f358 ARPA >> FastEthernet0/0 >> Internet 10.10.51.10 77 001b.54f7.6d6f ARPA >> FastEthernet0/0 >> R5# >> ------- >> C:\Documents and Settings\Administrator>arp -a >> >> Interface: 10.200.5.201 --- 0x20003 >> Internet Address Physical Address Type >> 10.200.5.254 00-d0-00-35-78-0a dynamic >> >> C:\Documents and Settings\Administrator> >> ---------- >> >> >> > > > -- > ------- > Jimmy Larsson > Ryavagen 173 > s-26030 Vallakra > Sweden > http://blogg.kvistofta.nu > ------- > -- ------- Jimmy Larsson Ryavagen 173 s-26030 Vallakra Sweden http://blogg.kvistofta.nu -------
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
