Johan,
Jimmy definitely had a rough week last week. I hadn't been made aware of it being as much of a problem until then but please guys, if you have problems feel free to let me know and we will do our best to alleviate the situation and do our best to improve it for the future. Hope studying is going well for all of you. Regards, Tyson Scott - CCIE #13513 R&S, Security, and SP Managing Partner / Sr. Instructor - IPexpert, Inc. Mailto: <mailto:[email protected]> [email protected] Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: <http://www.ipexpert.com/chat> www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S, Voice, Security & Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at <http://www.ipexpert.com/communities> www.ipexpert.com/communities and our public website at <http://www.ipexpert.com/> www.ipexpert.com From: [email protected] [mailto:[email protected]] On Behalf Of Johan Bornman Sent: Sunday, July 11, 2010 2:33 PM To: 'Jimmy Larsson' Cc: [email protected]; 'OSL Security' Subject: Re: [OSL | CCIE_Security] V1 Lab2 Thanks, Jimmy. That explains it. Will give it a shot. From: Jimmy Larsson [mailto:[email protected]] Sent: 11 July 2010 08:22 PM To: Johan Bornman Cc: OSL Security; [email protected] Subject: Re: [OSL | CCIE_Security] V1 Lab2 If you are working on proctorlabs gear is sounds like you have run into the same problem as I had plenty of times the last week. In that case you are experiencing problem with vmware where acs runs. Verify this in a top-down order: 1) Make sure that your routes are properly configured (route print, route add...). Still doesnt work? 2) Reboot the ACS-machine. Still doesn´t work? 3) Start wireshark and capture traffic on student nic. That has made magic for me a couple of times. STILL doesn´t work (been there!)? 4) Page Proctor labs after hours support and ask them to reboot the ESX host. Refer to Tyson. If they cant because of that would interfere with other studens/pods you are scr*w*d for that session. I think that Vol1 Lab 2 uses original ip-settings on ACS (10.1.1.100) and this problem only shows upp when re-addressing the student nic of ACS, but it might be that ACS hasnt been reverted correctly or something.. /Jimmy 2010/7/11 Johan Bornman <[email protected]> Hi, I cannot ping the ACS server from R2. The ACS and R2 are directly connected. A sh arp on R2 shows the ACS server, there is no arp entry for R2 on the ACS. The routes are good on the ACS. The switch configurations are fine, although none is required in the lab. I also removed the configs on all the devices but I am having the same problem. Am I missing anything or is it possible that there is a problem on the rack? Thanks Johan _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- ------- Jimmy Larsson Ryavagen 173 s-26030 Vallakra Sweden http://blogg.kvistofta.nu -------
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
