Yes, it works for telnet only. For ssh, you need to configure the following:
ip ssh port 2015 rotary 15 Put rotary 15 under a vty line and then ssh to 2015 With regards Kings On Thu, Aug 5, 2010 at 11:49 AM, Yogesh Gawankar <[email protected]>wrote: > Is this right? It only works for telnet. After i entered rotary 15 and > reenabled telnet I could telnet to port 3015. But if I ssh it fails to open > a connection on same port. > > So rotary on a switch only works for telnet or is this specific to 3750G or > am I missing something here? > > > Thanks and regards > > Yogesh Gawankar > > > --- On *Thu, 8/5/10, Kingsley Charles <[email protected]>* wrote: > > > From: Kingsley Charles <[email protected]> > Subject: Re: [OSL | CCIE_Security] Rotary on vty line > To: "Yogesh Gawankar" <[email protected]> > Cc: [email protected] > Date: Thursday, August 5, 2010, 3:54 PM > > The port number can be 3018, 5018 or 7018 > > > Table 1 Services and Port Numbers for Rotary Groups and Lines > > Services Provided > Base TCP Port for Rotaries > Base TCP Port for > Individual Lines > > Telnet protocol > > 3000 > > 2000 > > Raw TCP protocol (no > Telnet protocol) > > 5000 > > 4000 > > Telnet protocol, binary mode > > 7000 > > 6000 > > XRemote protocol > > 10000 > > 9000 > > > > With regards > Kings > > On Thu, Aug 5, 2010 at 8:48 AM, Yogesh Gawankar > <[email protected]<http://us.mc581.mail.yahoo.com/mc/[email protected]> > > wrote: > > HI all > > I have put in rotary 18 under vty 0 on a 3750G-24 port switch. However I am > unable to connect to it.Does anyone know what the port number would be ? > Also don't the switches support ip ssh port command like the routers? > > > Thanks and regards > > Yogesh Gawankar > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
