Thanks, Kings.
I tried that but I have this result: R7(config)#ip sla 1 R7(config-ip-sla)#exit R7(config)#ip sla schedule ? <1-2147483647> Entry number R7(config)#ip sla schedule 1 %Entry not configured Johan From: Kingsley Charles [mailto:[email protected]] Sent: 11 December 2010 02:01 PM To: Johan Bornman Cc: [email protected] Subject: Re: [OSL | CCIE_Security] SLA The syntax has changed. The format is similar to that off ASA's now. Configure ip sla <n> ip sla schedule <n> track <n> rtr <m> reachability Snippet from http://www.cisco.com/en/US/docs/ios/ipsla/command/reference/sla_02.html#wp10 52325 ip sla monitor _____ Note <http://www.cisco.com/en/US/i/templates/blank.gif> Effective with Cisco IOS Release 12.4(4)T, 12.2(33)SB, and 12.2(33)SXI, the ip sla monitor command is replaced by the ip sla command. See the ip sla command for more information. _____ With regards Kings On Sat, Dec 11, 2010 at 4:52 PM, Johan Bornman <[email protected]> wrote: Hi, Don't see ip sla monitor on my router: R7(config)#ip sla ? <1-2147483647> Entry Number enable Enable Event Notifications ethernet-monitor IP SLAs Auto Ethernet configuration group Group Configuration or Group Scheduling key-chain Use MD5 authentication for IP SLAs Control Messages logging Enable Syslog low-memory Configure Low Water Memory Mark reaction-configuration IP SLAs Reaction-Configuration reaction-trigger IP SLAs Trigger Assignment reset IP SLAs Reset responder Enable IP SLAs Responder restart Restart An Active Entry schedule IP SLAs Entry Scheduling What am I doing wrong? Johan _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
