Antonio,
Thanks for responding. It shows to be read/write. Cisco 2611XM (MPC860P) processor (revision 4.0) with 229376K/32768K bytes of memory. Processor board ID JHY0912K0KC M860 processor: part number 5, mask 2 2 FastEthernet interfaces 2 Serial(sync/async) interfaces 32K bytes of NVRAM. 49152K bytes of processor board System flash (Read/Write) Thanks, Matt Manire CCSP, CCNP, CCDP, MCSE 2003 & MCSE 2000 Network Security Administrator [email protected] t: 817.525.1863 f: 817.525.1903 m: 817.271.9165 First Rate | 1903 Ascension Boulevard | Arlington, TX 76006| www.FirstRate.com <http://www.firstrate.com/> From: Antonio Soares [mailto:[email protected]] Sent: Saturday, February 12, 2011 7:00 PM To: Manire, Matt; 'Jerome Dolphin' Cc: [email protected] Subject: RE: [OSL | CCIE_Security] Issue when trying to export certificate to flash Do a "show ver" on both 2600's and verify if the Flash is in Read-Only mode. Regards, Antonio Soares, CCIE #18473 (R&S/SP) [email protected] From: [email protected] [mailto:[email protected]] On Behalf Of Manire, Matt Sent: sábado, 12 de Fevereiro de 2011 18:21 To: Jerome Dolphin Cc: [email protected] Subject: Re: [OSL | CCIE_Security] Issue when trying to export certificate to flash Thanks everyone. I got it to work on a different router. I am not sure why it does not work on R1 for me but I could get it to work on R4. Both routers are 2600 routers. Thanks again, Matt Manire CCSP, CCNP, CCDP, MCSE 2003 & MCSE 2000 Network Security Administrator [email protected] t: 817.525.1863 f: 817.525.1903 m: 817.271.9165 First Rate | 1903 Ascension Boulevard | Arlington, TX 76006| www.FirstRate.com <http://www.firstrate.com/> From: Jerome Dolphin [mailto:[email protected]] Sent: Friday, February 11, 2011 9:30 PM To: Manire, Matt Cc: [email protected] Subject: Re: [OSL | CCIE_Security] Issue when trying to export certificate to flash That command works for me. I assume key is exportable? The error message suggests (to me anyway) there is something wrong with the destination 'Error: failed to open file.', does the filesystem exist? (dir flash:) and does it have any free space? Can you copy other things to flash (copy run flash:test.cfg) Can you format it with the IOS (format flash: , assuming you don't have anything important on there)? Good luck : ) On Sat, Feb 12, 2011 at 1:15 PM, Manire, Matt <[email protected]> wrote: All, Does anyone have an idea as to why I am unable to export this certificate to flash? See the error below. What am I missing? R1(config)#crypto key export rsa R1.cisco.com pem url flash: 3des cisco123 % Key name: R1.cisco.com Usage: General Purpose Key Exporting public key... Destination filename [R1.cisco.com.pub]? % Error: failed to open file. % Error: failed to export key. Thanks for your assistance. Matt Manire CCSP, CCNP, CCDP, MCSE 2003 & MCSE 2000 Network Security Administrator [email protected] t: 817.525.1863 f: 817.525.1903 m: 817.271.9165 First Rate | 1903 Ascension Boulevard | Arlington, TX 76006| www.FirstRate.com <http://www.firstrate.com/> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
