It is set that way as the ACL is used for the Policy NAT. You usually nat inside address to outside address and therefore having the ACL applied this way.
On 3/20/11, Fawad Khan <[email protected]> wrote: > Arsalan, > > Which Lab/Workbook volume is this, so far I am unable to find this > information from my Workbooks. What you are saying does make sense, > but I would like to see the actual information to make a proper > judgement. > > > Fawad. > > > > > On Sat, Mar 19, 2011 at 2:58 PM, Hussain Arsalan Ali <[email protected]> wrote: >> >> I am working on INE Workbook ( Task 1.14) where I am not able >> to understand the following thing . >> There is a task where when the outside users telnet to the outside >> interface >> of ASA , they should be redirected to R1 ( inside router . ) >> >> The solution to the problem in the workbook is >> access-list TEST permit tcp host 136.1.121.1 eq 23 136.1.122.0 >> 255.255.255.0 >> static (inside,outside) tcp interface 23 access-list TEST >> I think if the data is coming from the outside zone the ACL entry would be >> opposite since 136.1.121.1 is R1 ( inside router interface ) and >> 136.1.122.0 >> is the outside zone . >> >> Can anyone help me understand this issue . >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
