Are you able to ping the Management0/0 ip from another device on the same subnet ?
On Wed, Jun 15, 2011 at 12:56 AM, Kok Yong CHEONG <[email protected]>wrote: > hi guys > > need to clear a doubt that is very basic, sorry about that. > > for ASA's management interface, and to be used for "management-only", does > it require nameif and security-level information ? my view is that if you > are using for "management-only", you should not need nameif and > security-level configured, however, when i configure the following, the ASA > does not seems to be able to ping this management ip itself, is it expected > ? thanks in advance > > interface Management0/0 > no nameif > no security-level > ip address 10.100.100.10 255.255.255.0 > management-only > > (and no ip address being shown on Management 0/0 shown in the following > show command) > > ciscoasa# sh int ip brief > Interface IP-Address OK? Method Status > Protocol > GigabitEthernet0/0 192.1.22.10 YES manual up > up > GigabitEthernet0/1 10.22.22.10 YES manual up > up > GigabitEthernet0/2 192.168.3.10 YES manual up > up > GigabitEthernet0/3 192.168.4.10 YES manual up > up > Internal-Control0/0 127.0.1.1 YES unset up > up > Internal-Data0/0 unassigned YES unset up > up > Management0/0 unassigned YES manual up > up > > Regards > KY > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
