THANKS guys.
Best Regards. ______________________ Adil On Jun 18, 2011, at 2:41 AM, Kingsley Charles wrote: > I am not able to find the "excess-burst" keyword which should be the answer. > > I think, it should be configured as following > > police rate 32000 burst 6000 peak-burst 12000 > > Peak-burst is the excess burst to be used when we specify PIR. . > > I guess, since we don't specify PIR, IOS will consider peak-burst as the > excess burst itself. > > > > > With regards > Kings > > On Sat, Jun 18, 2011 at 7:31 AM, Adil Pasha <[email protected]> wrote: > Could some please help me out here? > > In YB Lab 2, Q-7.4 the requirement is to rate limit the traffic using > 'rate-limit' command and not to use MQC. I completely understand that. Just > in case if the question asks to use MQC how will I configure the following > rate-limit command using MQC? > > > ---------------------------------------------------------------------------------------------------------------------- > ! > interface FastEthernet0/0 > ip address 192.168.3.11 255.255.255.0 > rate-limit input access-group 101 32000 6000 12000 conform-action transmit > exceed-action drop > duplex auto > speed auto > crypto map gmap > ! > access-list 101 permit udp any host 10.1.1.1 eq isakmp > > ----------------------------------------------------------------------------------------------------------------------- > > I tried to create the following MQC config but did not see the option for > 12000. Could someone please let me know how will MQC work for 12000 if it is > one of the requirements of the question > ! > class-map type inspect match-all test > match protocol isakmp > ! > ! > policy-map type inspect test > class type inspect test > inspect > police rate 32000 burst 6000 > ! > > > Best Regards. > ______________________ > Adil > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
