Hi all,
is it possible to using CAR on Catalyst 3560 switch ? I 've tried but it
seems not working.
This is switch config
mls qos
ip routing
Interface FastEthernet0/10
No switchport
Ip address 1.1.1.1 255.255.255.0
rate-limit input access-group 133 8000 1500 2000 conform-action transmit
exceed-action drop
access-list 177 permit icmp any any
when I pinging through f0/10 switch port I don't match the policy
SW3#sh int f0/10 rate-limit
FastEthernet0/10 ASA - E0/0
Input
matches: access-group 177
params: 8000 bps, 1500 limit, 2000 extended limit
conformed 0 packets, 0 bytes; action: transmit
exceeded 0 packets, 0 bytes; action: drop
last packet: 433627355ms ago, current burst: 0 bytes
last cleared 3d00h ago, conformed 0 bps, exceeded 0 bps
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
