The PIX cannot do AnyConnect or Webvpn. Its only supported on the ASA. However if you were to get anything on the lab its usually just enabling AnyConnect to work and nothing in depth since you can’t use ASDM.
If you setup your group-policy and tunnel-group and enable the svc image, you should be good. Obviously I would be familiar on how to do basic setup of Anyconnect/webvpn, but I think it’s a good handoff for the speed increase you get with GNS3 and the PIX image. Here is a good example if any is wondering on setting up a AnyConnect VPN on the ASA http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808efbd2.shtml Also if your still interested in trying, this is a good article for setting it up http://www.brainbump.net/2010/03/gns3-how-to-emulate-asa-in-windows-7/ Thanks Aaron From: Adil Pasha [mailto:[email protected]] Sent: Friday, August 19, 2011 10:44 AM To: Aaron O'Conner Cc: 'William Yeo'; Leon Lai; CCIE Security Maillist Subject: Re: [OSL | CCIE_Security] ASA on GNS3. Can PIX do webvpn? Also can it do Anyconnect? I have not tried it. Best Regards. ______________________ Adil On Aug 18, 2011, at 10:40 PM, Aaron O'Conner wrote: You guys can run the PIX “hardware” image in GNS3 up to 8.0.4 code. That’s what I use. Its almost identical to the ASA. For all intensive purposes it is the same for the lab. I have always had trouble with the ASA emulation in GNS3, and the PIX emulation is much faster. Hope this helps. Aaron From: [email protected]<mailto:[email protected]> [mailto:[email protected]]<mailto:[mailto:[email protected]]> On Behalf Of William Yeo Sent: Thursday, August 18, 2011 8:56 PM To: Leon Lai Cc: CCIE Security Maillist Subject: Re: [OSL | CCIE_Security] ASA on GNS3. Hi Leon, Yes the website is shut down due to cisco complain. Appreciate if you could share out the VM image in some public repository. http://asaproject.gromnet.net/ Thanks in advance -William Yeo On Fri, Aug 19, 2011 at 1:35 AM, Leon Lai <[email protected]<mailto:[email protected]>> wrote: Hi, U may search for asa image project by google or baidu. It is a iso image for emulating asa on vmware 7. It can run asa upto 8,02. However, the official website was suspended this year. 2011-8-18 下午5:51 於 "Adil Pasha" <[email protected]<mailto:[email protected]>> 寫道： > Guys, > > Does anyone has a working ASA OS files and working parameters? > > I have my ASA working to the point where it loads in GNS3 with some warning > messages and then I am not able to save the configuration or even configure > an interface. > > Please help me out here. > > Best Regards. > ______________________ > Adil > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com<http://www.ipexpert.com> > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com<http://www.PlatinumPlacement.com> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com<http://www.PlatinumPlacement.com> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com<http://www.PlatinumPlacement.com>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
