Can u provide sh run all failover. And complete sho failover. Thanks
FNK Sent from an iPhone On Nov 2, 2011, at 12:13 PM, Kingsley Charles <[email protected]> wrote: > Hi Piotr > > That command doesn't show info relating to the intf policy. > > With regards > Kings > > On Wed, Nov 2, 2011 at 9:39 PM, Piotr Matusiak <[email protected]> wrote: > Hi Kings, > > What about sho failover group 1? > > Regards, > Piotr > > > 2011/11/2 Kingsley Charles <[email protected]> > Hi all > > With A/A failover, the interface policy is configured per group and not the > unit. But "show failover" command doesn't display "interface policy" for two > groups separately. Any thoughts? > > > asa1# sh failover > Failover On > Failover unit Primary > Failover LAN Interface: lanfail GigabitEthernet0/2 (up) > Unit Poll frequency 1 seconds, holdtime 15 seconds > Interface Poll frequency 5 seconds, holdtime 25 seconds > Interface Policy 2 > Monitored Interfaces 3 of 250 maximum > Version: Ours 8.0(5), Mate 8.0(5) > Group 1 last failover at: 12:20:01 UTC Nov 2 2011 > Group 2 last failover at: 12:20:01 UTC Nov 2 2011 > > > With regards > Kings > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
