Thanks, 2012/4/30 Johan Bornman <[email protected]>
> Thanks, Kings.**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Kingsley Charles > *Sent:* 29 April 2012 09:08 PM > *To:* Piotr Tokarzewski > *Cc:* [email protected] > *Subject:* Re: [OSL | CCIE_Security] sla monitor**** > > ** ** > > The packets are sent every 2 secs (frequency). Now, if for 2 sec (timeout) > there is no reply, the device is considered as failed. > > With regards > Kings**** > > On Sun, Apr 29, 2012 at 9:33 PM, Piotr Tokarzewski < > [email protected]> wrote:**** > > Hi all,**** > > **** > > I have a question concerning ip sla on asa but I not sure if this answer > is correct. **** > > **** > > Question:**** > > Configure asa1 to monitor the internet service provider (isp) gateway to > this server (1.1.1.1) and, should the cisco asa be unable to reach it, to > redirect only traffic to this server out the backup interface within two > seconds. **** > > **** > > Answer**** > > sla monitor 10**** > > type echo protocol ipIcmpEcho 1.1.1.1 interface outside**** > > timeout 2000 (ms)**** > > frequency 2 (s) **** > > exit**** > > sla monitor schedule 10 life forever start-time now**** > > track 88 rtr 10 reachability**** > > **** > > **** > > In my opinion: timeout – the time to expire every probe, frequency – how > often to send a probe, so in this question host will become unreachable > after 4s not 2s. Could anyone confirm if I am right?**** > > ** ** > > Regards**** > > Piotr**** > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com**** > > ** ** >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
