Hi Mike:
This is a bit tricky question. By default the admin distance of EIGRP summary route has an AD of 5. If your floating static route (backup default has AD above 5 say 222 or even 6). When Outside-1 goes down. The default null route of EIGRP gets installed which has an AD of 5 and not the Outside-2 default. Hence to avoid this situation we shall increase the AD of the summary EIGRP route above the floating static default. Alternate approach, keep the floating static default of Outside-2 with an AD below the AD of EIGRP summary route. Test it out by shutting P1.34 interface. DSG has these captured. route Outside-2 0.0.0.0 0.0.0.0 100.100.35.5 222 summary-address eigrp 111 0.0.0.0 0.0.0.0 250 Samarth Chidanand Sr Instructor / Developer - IPexpert CCIE #18535 (R&S, Security) CCSI #34585 From: [email protected] [mailto:[email protected]] On Behalf Of Mike Rojas Sent: Saturday, April 13, 2013 4:29 AM To: [email protected] Subject: [OSL | CCIE_Security] WorkBook 1 Task4 point 5 Hi, I do have some questions in regards to that specific point. It says that I need to send the default route to Router 1 (Which I already did to practice prefix lists :)) but it also says that change the distance of the null route to 250 and that is where I get confused. Is the null route the default route? Also, is that route the same one that it is being advertised? I saw that I can change the distance, but only for routes inserted on our routing table. Was looking also for the DSG of Workbook 1 but it seems like it is not finished already. Thanks, Mike.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
