Did that...but it never uses the most specific one, it keeps using the default gateway but this time for the P1 interface...
Mike Sent from my iPhone On Jun 13, 2013, at 3:56 PM, "Jay McMickle" <[email protected]> wrote: > Did you check the box that the management is only for Management so that it > enables routing on other interfaces? You can do this through the setup or the > interface menu. > > I had a similar problem on my vWSA when I was using it in the lab (using > management interface for tap and management) and then wanted to use it in > production. Was this maybe a previous config or use that would have changed > this? Can you wipe it and run through the setup again if you can't get it > working through the menu or CLI? > > Regards, > Jay McMickle- 2x CCIE #35355 (R/S,Sec) > Sent from my iPhone 5 > > On Jun 13, 2013, at 11:18 AM, Mike Rojas <[email protected]> wrote: > >> Jay, >> >> No, I am not using the management interface. Yes, I added an static Route >> for the destination network on the P1 port, still getting routed via the >> management. >> >> Mike. >> >> Subject: Re: [OSL | CCIE_Security] WSA routing questions >> From: [email protected] >> Date: Thu, 13 Jun 2013 10:22:49 -0500 >> CC: [email protected] >> To: [email protected] >> >> Mike- >> Are you using only the WSA management interface? Did you add a static route >> on the WSA or only using the default route? >> >> Regards, >> Jay McMickle- 2x CCIE #35355 (R/S,Sec) >> Sent from my iPhone 5 >> >> On Jun 12, 2013, at 8:48 PM, Mike Rojas <[email protected]> wrote: >> >> Hi, >> >> So I am using a virtual WSA for the WSA book. The main issue that I have is >> that I need to point a route of 192.168.0.0 to the ASA. >> I put the route in place, but all the traffic is still taking the Management >> default gateway to return back to the host that made the request. >> I remember that on the WSA that I used on proctor labs was not having this >> behavior. >> >> Any ideas or suggestions? >> >> Mike. >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
