Hey Piotr, It is the same as what is in the DSG - Line for line. I was using POD 123
I can pull them if you really need me to or you can just try what is in the DSG and let me know that R6 comes up. Let me know Thanks Jason On Sun, Apr 13, 2014 at 8:36 AM, Piotr Kaluzny <pio...@ipexpert.com> wrote: > Hey Jason > > Do you still have your DMVPN configs? > > Regards, > > Piotr Kaluzny : Sr Instructor : iPexpert <http://www.ipexpert.com> > CCIE # 25665 :: Security > *:: World-Class Cisco Certification Training* > > Direct: +1-810-326-1444 > :: Free Videos <http://www.youtube.com/ipexpertinc> > :: Free Training / Product Offerings <https://www.facebook.com/IPexpert> > :: CCIE Blog <http://blog.ipexpert.com/> > :: Twitter <https://twitter.com/ipexpert> > > > On Sat, Apr 12, 2014 at 9:08 PM, Jason Maynard <jasonlmayn...@gmail.com>wrote: > >> Hey Folks, >> >> I am not sure whether I am missing something but I cannot get R6 to come >> up and stay up when using multipoint. The previous task (Pure Hub/Spoke) >> works fine. >> >> Checked the DSG and nothing there that sheds some light. >> >> R8(config-if)#do sh ip nhrp >> 172.16.100.5/32 via 172.16.100.5 >> Tunnel100 created 00:03:03, expire 01:56:56 >> Type: dynamic, Flags: unique registered >> NBMA address: 8.9.50.5 >> 172.16.100.66/32 >> Tunnel100 created 00:00:01, expire 00:03:03 >> Type: incomplete, Flags: negative >> Cache hits: 2 >> >> Thoughts? >> >> -- >> Jason Maynard >> Twitter: @FE80CC1E >> Blog: http://packetsanalyzed.blogspot.ca/ >> >> >> >> _______________________________________________ >> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: >> >> iPexpert on YouTube: www.youtube.com/ipexpertinc >> > > -- Jason Maynard Senior Solutions Architect CCIE #29033 Email: jasonlmayn...@gmail.com
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
