Will do and thanks for running through it. I am not sure what was happening but it was near the end of the lab. #thatismyexcusefornow :/
Will try it again Thanks Piotr! On Sun, Apr 13, 2014 at 10:11 AM, Piotr Kaluzny <pio...@ipexpert.com> wrote: > Jason > > All looks good on my pod : > > R6#sh ip nhrp br > Target Via NBMA Mode Intfc Claimed > 172.16.100.5/32 172.16.100.5 8.9.50.5 dynamic Tu100 < > > > 172.16.100.6/32 172.16.100.6 8.9.50.6 dynamic Tu100 < > > > 172.16.100.8/32 172.16.100.8 8.9.2.8 static Tu100 < > > > > R6#traceroute 10.5.5.5 > > Type escape sequence to abort. > Tracing the route to 10.5.5.5 > > 1 172.16.100.5 40 msec * 36 msec > > Please give it one more try when you get a chance - and make sure IPSec > tunnel is built between the Spokes and Hub if you have issues. > > > Regards, > > Piotr Kaluzny : Sr Instructor : iPexpert <http://www.ipexpert.com> > CCIE # 25665 :: Security > *:: World-Class Cisco Certification Training* > > Direct: +1-810-326-1444 > :: Free Videos <http://www.youtube.com/ipexpertinc> > :: Free Training / Product Offerings <https://www.facebook.com/IPexpert> > :: CCIE Blog <http://blog.ipexpert.com/> > :: Twitter <https://twitter.com/ipexpert> > > > On Sun, Apr 13, 2014 at 5:27 PM, Jason Maynard <jasonlmayn...@gmail.com>wrote: > >> Hey Piotr, >> >> It is the same as what is in the DSG - Line for line. I was using POD 123 >> >> I can pull them if you really need me to or you can just try what is in >> the DSG and let me know that R6 comes up. >> >> Let me know >> >> >> Thanks >> Jason >> >> >> On Sun, Apr 13, 2014 at 8:36 AM, Piotr Kaluzny <pio...@ipexpert.com>wrote: >> >>> Hey Jason >>> >>> Do you still have your DMVPN configs? >>> >>> Regards, >>> >>> Piotr Kaluzny : Sr Instructor : iPexpert <http://www.ipexpert.com> >>> CCIE # 25665 :: Security >>> *:: World-Class Cisco Certification Training* >>> >>> Direct: +1-810-326-1444 >>> :: Free Videos <http://www.youtube.com/ipexpertinc> >>> :: Free Training / Product Offerings <https://www.facebook.com/IPexpert> >>> :: CCIE Blog <http://blog.ipexpert.com/> >>> :: Twitter <https://twitter.com/ipexpert> >>> >>> >>> On Sat, Apr 12, 2014 at 9:08 PM, Jason Maynard >>> <jasonlmayn...@gmail.com>wrote: >>> >>>> Hey Folks, >>>> >>>> I am not sure whether I am missing something but I cannot get R6 to >>>> come up and stay up when using multipoint. The previous task (Pure >>>> Hub/Spoke) works fine. >>>> >>>> Checked the DSG and nothing there that sheds some light. >>>> >>>> R8(config-if)#do sh ip nhrp >>>> 172.16.100.5/32 via 172.16.100.5 >>>> Tunnel100 created 00:03:03, expire 01:56:56 >>>> Type: dynamic, Flags: unique registered >>>> NBMA address: 8.9.50.5 >>>> 172.16.100.66/32 >>>> Tunnel100 created 00:00:01, expire 00:03:03 >>>> Type: incomplete, Flags: negative >>>> Cache hits: 2 >>>> >>>> Thoughts? >>>> >>>> -- >>>> Jason Maynard >>>> Twitter: @FE80CC1E >>>> Blog: http://packetsanalyzed.blogspot.ca/ >>>> >>>> >>>> >>>> _______________________________________________ >>>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: >>>> >>>> iPexpert on YouTube: www.youtube.com/ipexpertinc >>>> >>> >>> >> >> >> -- >> Jason Maynard >> Senior Solutions Architect >> CCIE #29033 >> Email: jasonlmayn...@gmail.com >> >> > -- Jason Maynard Senior Solutions Architect CCIE #29033 Email: jasonlmayn...@gmail.com
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
