Exactly, take care with that because if you are practicing with the Proctorlabs equipment, they only have PVDM2(NM-HDV2)in their equipmente. Try to get some PVDM (NM-HDV) by other way and get some practice before the lab, I thinks PDVM configuration is easier but you have to be prepared for both.
-----Original Message----- From: [EMAIL PROTECTED] on behalf of Jonathan Charles Sent: Tue 4/8/2008 12:21 PM To: Christian Narvaez Cc: CCIE Maillist; Edward French Subject: Re: [OSL | CCIE_Voice] 3725 So, since they are using 3700s in the lab, we have to use the old, non-PVDM2 way of creating transcoders/CFBs, etc...? Just to confirm my paranoia... Jonathan On Tue, Apr 8, 2008 at 11:05 AM, Christian Narvaez <[EMAIL PROTECTED]> wrote: > > > > > As I know the 3725 in the real lab has PVDM and the ISR routers have PVDM2. > So you must be familiar with both ways of configuring Media Resources on > routers. > > > CONFIGURATION EXAMPLE WITH PVDM > ------------------------------- > voice-card 0 > dspfarm > dsp services dspfarm > ! > sccp > sccp local vlan210 > sccp ccm 10.1.200.21 priority 1 > sccp ccm 10.1.200.20 priority 2 > sccp ip precedence 3 > ! > dspfarm transcoder maximum session 2 > dspfarm confbridge maximum session 1 > dspfarm codec g729 vad disable > dspfarm > ! > > > CONFIGURATION EXAMPLE WITH PVDM2 > -------------------------------- > voice-card 0 > dspfarm > dsp services dspfarm > ! > sccp > sccp local vlan210 > sccp ccm 10.1.200.21 identifier 1 > sccp ccm 10.1.200.20 identifier 2 > ! > sccp ccm group 1 > associate ccm 1 priority 1 > associate ccm 2 priority 2 > associate profile 2 register mtp001193 > associate profile 1 register cfb001193 > ! > dspfarm profile 2 transcoder > codec g711ulaw > codec g729r8 > maximum session 2 > associate application SCCP > no shut > ! > dspfarm profile 1 conference > codec g711ulaw > codec g729r8 > maximum session 2 > associate application SCCP > no shut > > > > > > -----Original Message----- > From: [EMAIL PROTECTED] on behalf of Edward French > Sent: Mon 4/7/2008 7:01 PM > To: CCIE Maillist > Subject: [OSL | CCIE_Voice] 3725 > > The Lab blue print says the routers are 3725's, does anyone know of > specific configurations differences between the 3725 and the ISR routers? If > I am not mistaken there DSP configuration is different? > > >
