Good point- AAR requires you to configure an AAR CSS, AAR Group on the remote site gateway in addition to checking the Redirecting Number Outbound checkbox (if this is MGCP then no mgcp/mgcp on the IOS). You need to check the Redirecting Number Inbound checkbox on the HQ gateway. You also need an external number mask and aar group on the hunt pilot. It should work a treat having done this. The Redirecting Number is good since CCM builds this in the case of AAR. Only SRST needs a workaround solution to get the caller to hear subscriber greeting. The SRST solution was outlined in a previous email. Don't overlap the two questions/solutions since they are mutually exclusive.
Vik Malhi - CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Onur Tufekci Sent: Wednesday, April 16, 2008 12:12 PM To: Jonathan Charles Cc: CCIE Voice Subject: Re: [OSL | CCIE_Voice] Dial Plan design question, AAR with vmail... Are you trying to configure only AAR or only SRST? On Wed, Apr 16, 2008 at 2:03 PM, Jonathan Charles <[EMAIL PROTECTED]> wrote: OK, so AAR kicks in and I forward the call to the PSTN, the user I was dialing does not answer and the call should forward to vmail... how would we make this work? voicemail under srst config? Jonathan
