Do a show frame pvc and see if it is inactive, active or deleted... might have a DLCI issue...
Jonathan On Sat, Aug 30, 2008 at 2:50 AM, Paul and Bobs <[EMAIL PROTECTED]>wrote: > Hi > > > I am stugling with the FRST setup. This is the config from my BR1 router > > interface Serial0/2/0 > no ip address > encapsulation frame-relay > frame-relay interface-dlci 122 ppp Virtual-Template1 > ! > interface Virtual-Template1 > bandwidth 64 > ip address 192.168.122.2 255.255.255.252 > ip broadcast-address 192.168.122.3 > ip pim sparse-dense-mode > ppp multilink > ppp multilink interleave > ppp multilink fragment delay 10 > service-policy output LLQ-HQ > > > > > > and this is my config from my HQ > > > > interface Serial0/1/0 > no ip address > encapsulation frame-relay > ! > interface Serial0/1/0.122 multipoint > frame-relay interface-dlci 122 ppp Virtual-Template1 > ! > interface Virtual-Template1 > bandwidth 64 > ip address 192.168.122.1 255.255.255.252 > ip broadcast-address 192.168.122.3 > ip pim sparse-dense-mode > ip summary-address eigrp 100 192.168.122.1 255.255.255.255 5 > ip summary-address eigrp 100 192.168.122.0 255.255.255.0 5 > service-policy output LLQ-SB > ! > > > > > I cant seem to get the link up. > > Paul >
