Hi
I am stugling with the FRST setup. This is the config from my BR1 router interface Serial0/2/0 no ip address encapsulation frame-relay frame-relay interface-dlci 122 ppp Virtual-Template1 ! interface Virtual-Template1 bandwidth 64 ip address 192.168.122.2 255.255.255.252 ip broadcast-address 192.168.122.3 ip pim sparse-dense-mode ppp multilink ppp multilink interleave ppp multilink fragment delay 10 service-policy output LLQ-HQ and this is my config from my HQ interface Serial0/1/0 no ip address encapsulation frame-relay ! interface Serial0/1/0.122 multipoint frame-relay interface-dlci 122 ppp Virtual-Template1 ! interface Virtual-Template1 bandwidth 64 ip address 192.168.122.1 255.255.255.252 ip broadcast-address 192.168.122.3 ip pim sparse-dense-mode ip summary-address eigrp 100 192.168.122.1 255.255.255.255 5 ip summary-address eigrp 100 192.168.122.0 255.255.255.0 5 service-policy output LLQ-SB ! I cant seem to get the link up. Paul
