Thanks Chris, I configured a dial-peer with destination pattern 3... and put in session target ras
Looks like that was the key. It now registers the ipipgw Thanks for your help Von Clawson Sr. Voice Engineer, NTAC Nexus IS, Inc. Office: 480.517.6672 Mobile: 480.200.1918 Fax: 480.517.6673 [email protected] -----Original Message----- From: Chris Parker [mailto:[email protected]] Sent: Thursday, January 08, 2009 11:27 AM To: Clawson, Von Subject: Re: [OSL | CCIE_Voice] Registering IPIPGW to gatekeeper I believe you need at least 1 voip dial peer configured before the ipipgw will register. Clawson, Von wrote: > > I'm having a problem registering IPIPGW to gatekeeper. Can someone > help me determine if my configuration is correct? > > voice service voip > > allow-connections h323 to h323 > > allow-connections h323 to sip > > allow-connections sip to h323 > > allow-connections sip to sip > > ! > > interface Loopback0 > > ip address 172.9.100.1 255.255.255.0 > > ip ospf network point-to-point > > h323-gateway voip interface > > h323-gateway voip id VGK ipaddr 172.9.100.1 1719 > > h323-gateway voip h323-id ipipgw > > h323-gateway voip bind srcaddr 172.9.100.1 > > ! > > gateway > > ! > > gatekeeper > > zone local VGK ipexpert.com 172.9.100.1 > > no shutdown > > ! > > But when I look at the end points it does not show the ipipgw registered. > > Pod19-HQ-RTR#sh gatekeeper end > > GATEKEEPER ENDPOINT REGISTRATION > > ================================ > > CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags > > --------------- ----- --------------- ----- --------- ---- ----- > > Total number of active registrations = 0 > > Any help would be appreciated. > > *Von Clawson* > > Sr. Voice Engineer, NTAC > > *Nexus IS, Inc.* > > *Office*: 480.517.6672 *Mobile*: 480.200.1918 *Fax*: 480.517.6673 > > [email protected] <mailto:[email protected]> >
