Does the call complete as 729 withthe mtp checked? -----Original Message----- From: [email protected] Sent: Monday, March 23, 2009 12:28 PM To: Chris Parker <[email protected]> Cc: [email protected] <[email protected]> Subject: Re: [OSL | CCIE_Voice] Gatekeeper blues :|
Yep, everything started working once I checked off requires MTP on the trunk. . But why? The call is coming in as g.729 and the device pool the trunk is in is set to g.729 On Mon, Mar 23, 2009 at 11:54 AM, Chris Parker <[email protected]> wrote: If you are getting ring through when you place the call, then your GK config is probably OK. If its ringing that tells me the GK sent the call to the UCM. The fact that it goes fast busy when you pick up sounds like a codec/media problem to me. Check the media resources config and your regions. Chris [email protected] wrote: I'm working through scenario , trying to get 4 digit dial from BR2 to HQ working via the HQ GK. The GK config looks like this. gatekeeper zone local UCM ipexpert.com <http://ipexpert.com> 142.1.1.1 zone prefix UCM 1... gw-priority 10 Trunk_2 zone prefix UCM 1... gw-priority 9 Trunk_1 zone prefix UCM 1... gw-priority 0 cmegw zone prefix UCM 3... gw-priority 10 cmegw zone prefix UCM 3... gw-priority 0 Trunk_2 Trunk_1 gw-type-prefix 1#* gw ipaddr 142.2.64.12 1720 gw ipaddr 142.2.64.11 1720 no shutdown I have the UCM registering without a tech-prefix defined and I've adjusted the "service parameter" to insure the UCM listens on port 1720. The problem is the call rings through to the HQ DN but comes up fast busy when I answer the call. I've attempted to configure the "Trunk" from UCM as both an H.225 Trunk as well as an ICT trunk. I've unchecked "Wait for far end h.245 terminal capability" as well. Any help is greatly appreciated.
