Hi, I've done the new IPEXPERT volume 6 workbook labs 1 and 2. I am having problems with my CIPC running SIP mode. In the workbook I needed to convert it from a SCCP to a SIP phone via phone templates. I've done that and since then I cannot use the CIPC anymore. For example if I configure the CIPT phone manually (auto reg disabled for SIP and SCCP) and make it a SIP phone. the CIPT always give the "unprovisioned" notice. I also tried the register my CIPT SIP softphone to the CUCME (volume 3 lab) but same problem. ip blue / SCCP works perfectly, also the IPEXPERT SIP phones are also registered. So it seems that the problem is in the CIPT itself.
As I already menioned before I converted the SCCP phone to a SIP phone. I noticed (just as mentioned in the workbook) that the CIPT downloaded an SIP image . This SIP image is also shown as the signalling protocol on the CIPT. I already installed the CIPT again, but same problem. Further I would also like to use my CIPT again for SCCP calls. How can I convert it back to a SCCP phone? As I am very new to this material I hope can help me a bit in better understanding how this works. Thanks Jb.
