Hi Angel,

I has a few problems with SIP Phone registration to CUCME as well. Same
thing like yours where one phone will register and the other will not. Try
doing a debug ccsip messages to see what the problem is. Also,

Few things to try out:
1) Under voice register global config, redo the create profile command
2) You have the authenticate register command but no username/pwd under the
voice register pools
3) Add the bind all source-interface command under the SIP.


HTH

On Tue, Mar 23, 2010 at 9:38 AM, Angel Perez <[email protected]> wrote:

>  Hi:
>
>
> I've the following scenario: cume with two sip phones
>
> After change firmware from sccp to sip both phones get the fw correctly,
> but only one of them get registered, the other one gets the configuration
> file but  never gets registered.
>
> The voice register global and voice register pool configuration looks find
> as one of the phone is registered, so I think that the problem is behind
> some problems after upgradin the fw.
>
>
> *voice service voip
>  sip
>   registrar server expires max 600 min 60
> !*
>
> *voice register global
>  mode cme
>  source-address 142.102.66.254 port 5060
>  max-dn 4
>  max-pool 4
>  load 7961 SIP41.8-3-3S
>  authenticate register
>  timezone 43
>  hold-alert
>  create profile sync 0004152480221706
> !
> voice register dn  1
>  number 4001
> !
> voice register dn  2
>  number 4002
> !
> !
> voice register pool  1
>  id mac 0017.E066.C903
>  type 7961
>  number 1 dn 1
>  username stc1 password cisco
>  codec g711ulaw
> !
> voice register pool  2
>  id mac 0017.E066.C72F
>  type 7961
>  number 2 dn 2
>  username stc2 password cisco
>  codec g711ulaw
> !*
>
> ephone 2 is not registered
>
> Also I can find the .xml config file binded to voice register
>
> *sh voice register tftp-bind
> *
> *tftp-server syncinfo.xml url system:/cme/sipphone/syncinfo.xml
> tftp-server SIPDefault.cnf url system:/cme/sipphone/SIPDefault.cnf
> tftp-server softkeyDefault_kpml.xml url
> system:/cme/sipphone/softkeyDefault_kpml.xml
> tftp-server softkeyDefault.xml url system:/cme/sipphone/softkeyDefault.xml
> tftp-server SEP0017E066C903.cnf.xml url system:/cme/sipphone/
> SEP0017E066C903.cnf.xml
> tftp-server SEP0017E066C72F.cnf.xml url system:/cme/sipphone/
> SEP0017E066C72F.cnf.xml*
>
>
> *dir system:cme/sipphone  *
> *
> Directory of system:cme/sipphone/*
> *  237  -rw-           1  Mar 23 2010 21:31:04 +08:00  OS79XX.TXT
>   241  -rw-        3277  Mar 23 2010 21:31:11 +08:00
> SEP0017E066C72F.cnf.xml
>   240  -rw-        2651  Mar 23 2010 21:31:11 +08:00
> SEP0017E066C903.cnf.xml
>   235  -rw-        1881  Mar 23 2010 21:31:11 +08:00  SIPDefault.cnf
>   238  -rw-        3613  Mar 23 2010 21:31:11 +08:00  softkeyDefault.xml
>   239  -rw-        3579  Mar 23 2010 21:31:11 +08:00
> softkeyDefault_kpml.xml
>   236  -rw-          69  Mar 23 2010 21:31:11 +08:00  syncinfo.xml*
> **
> I can see the phone at voice registered pool
>
> *sh voice register all *
>
> *VOICE REGISTER POOL
> ===================
> Pool Tag 1
> Config:
>   Mac address is 0017.E066.C903
>   Type is 7961
>   Number list 1 : DN 1
>   Proxy Ip address is 0.0.0.0
>   DTMF Relay is disabled
>   Call Waiting is enabled
>   DnD is disabled
>   keep-conference is enabled
>   username stc1 password cisco
>   kpml signal is enabled
>   service-control mechanism is supported
>   registration Call ID is **
> [email protected]*<[email protected]>
> *
>   active primary line is: 4001*
> *  contact IP address: 142.102.66.50 port 5060*
>
> *Dialpeers created:*
> *dial-peer voice 40001 voip
>  destination-pattern 4001
>  session target ipv4:142.102.66.50:5060
>  session protocol sipv2
>  digit collect kpml
>  codec  g711ulaw bytes 160
>   after-hours-exempt   FALSE          *
> *Statistics:
>   Active registrations  : 1*
> *  Total SIP phones registered: 1
>   Total Registration Statistics
>     Registration requests  : 7
>     Registration success   : 7
>     Registration failed    : 0
>     unRegister requests    : 6
>     unRegister success     : 6
>     unRegister failed      : 0*
>
> *Pool Tag 2
> Config:
>   Mac address is 0017.E066.C72F
>   Type is 7961
>   Number list 2 : DN 2
>   Proxy Ip address is 0.0.0.0
>   DTMF Relay is disabled
>   Call Waiting is enabled
>   DnD is disabled
>   keep-conference is enabled
>   username stc2 password cisco
>   kpml signal is enabled
>   service-control mechanism is not supported*
> *Dialpeers created:*
> *Statistics:
>   Active registrations  : 0*
> *  Total SIP phones registered: 0
>   Total Registration Statistics
>     Registration requests  : 0
>     Registration success   : 0
>     Registration failed    : 0
>     unRegister requests    : 0
>     unRegister success     : 0
>     unRegister failed      : 0*
> **
> **
> Everything looks find, but the phone is in a loop triying to register
>
> *deb tftp events*
>
> Mar 23 13:34:29.184: TFTP: Looking for CTLSEP0017E066C72F.tlv
>
> Mar 23 13:34:30.188: TFTP: Looking for SEP0017E066C72F.cnf.xml
> Mar 23 13:34:30.188: TFTP: Opened
> system:/cme/sipphone/SEP0017E066C72F.cnf.xml, fd 7, size 3277 for process
> 155
> Mar 23 13:34:30.204: TFTP: Finished
> system:/cme/sipphone/SEP0017E066C72F.cnf.xml, time 00:00:00 for process 155
>
> Mar 23 13:34:36.428: TFTP: Looking for English_United_States/mk-sip.jar
>
> Mar 23 13:34:37.388: TFTP: Looking for United_States/g3-tones.xml
>
> Mar 23 13:34:38.284: TFTP: Looking for softkeyDefault_kpml.xml
> Mar 23 13:34:38.284: TFTP: Opened
> system:/cme/sipphone/softkeyDefault_kpml.xml, fd 7, size 3579 for process
> 155
> Mar 23 13:34:38.324: TFTP: Finished
> system:/cme/sipphone/softkeyDefault_kpml.xml, time 00:00:00 for process 155
>
> And then it downloads the same files again and again
>
> Any suggestions would be appreciated
>
> Thanks
>
>
>
>
>
>
> ------------------------------
> Hotmail: Trusted email with Microsoft’s powerful SPAM protection. Sign up
> now. <https://signup.live.com/signup.aspx?id=60969>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to