Hi Experts,
I am trying to configure so that calling phone will show 7 digit "To 8884343
" in SRST and Normal mode.
I use dial-peer 7 pots in normal mode (send 8884343 from Route Pattern to BR-1
GW)
RP Local : 9.[2-9]xxxxxx , predot , send to BR-1 (H323) , hit dial-peer 7
pots
And it did show 7 digit "8884343" in my Calling phone
BR-1 dialpeer
----------------------
dial-peer voice 7 pots
destination-pattern [2-9]......$
port 0/0/0:23
forward-digits all
However when I dial 98884343 in SRST mode,I expect it will use dial-peer 9 pots
(because I have to dial 9 for local call)
dial-peer voice 9 pots
destination-pattern 9[2-9]......$
port 0/0/0:23
forward-digits 7
But the call from phone always hit dial-peer 7. And if I shut down dial peer
7, local call will work fine in SRST.
But why it hit dial-peer 7 in SRST for 98884343 , which I think dial-peer 9 is
more precise match ??
And if I tested using "csim start 98884343" in SRST , it will hit dial-peer 9
(which is right for this case). But if from IP phone it will use dial-peer 7
when I dial 98884343 in SRST mode.
Anybody know why and shade light on this ?
Thks
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
