Remove $ from dial-peer 7. It'll wait for inter-digit timeout and match dial-peer 9 after you press the last digit.
Let me know if that works. Hth, Tapan From: [email protected] [mailto:[email protected]] On Behalf Of Erwan Erwan Sent: Wednesday, July 28, 2010 11:40 PM To: [email protected] Subject: [OSL | CCIE_Voice] SRST dial-peer behaviour Hi Experts, I am trying to configure so that calling phone will show 7 digit "To 8884343 " in SRST and Normal mode. I use dial-peer 7 pots in normal mode (send 8884343 from Route Pattern to BR-1 GW) RP Local : 9.[2-9]xxxxxx , predot , send to BR-1 (H323) , hit dial-peer 7 pots And it did show 7 digit "8884343" in my Calling phone BR-1 dialpeer ---------------------- dial-peer voice 7 pots destination-pattern [2-9]......$ port 0/0/0:23 forward-digits all However when I dial 98884343 in SRST mode,I expect it will use dial-peer 9 pots (because I have to dial 9 for local call) dial-peer voice 9 pots destination-pattern 9[2-9]......$ port 0/0/0:23 forward-digits 7 But the call from phone always hit dial-peer 7. And if I shut down dial peer 7, local call will work fine in SRST. But why it hit dial-peer 7 in SRST for 98884343 , which I think dial-peer 9 is more precise match ?? And if I tested using "csim start 98884343" in SRST , it will hit dial-peer 9 (which is right for this case). But if from IP phone it will use dial-peer 7 when I dial 98884343 in SRST mode. Anybody know why and shade light on this ? Thks
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
