Hi Please find BR2 router configuration, so when I call from PSTN Phone which is connected to PSTN GW, I dial 3432143005 or 32143005 I get fast bussy on PSTN Phone, call never hits BR router which is why I dont see any message in debug isdn q931 on BR2 router. from BR2 Phones ie DN 3005 I am able to dial 911 / 999 / 3432141891 which is a PSTN DN configured on PSTN phone.
Just to describe my Lab, Its my home setup, I dont have E1 modules they are been orderd, so I am have configured T1 between PSTN and BR2 for now. Regards Rafay On Mon, Nov 29, 2010 at 4:47 PM, <[email protected]> wrote: > Hi Rafay, > > > > Can you send the configuration from Site C? He was referring to the > translation profile applied incoming on the voice-port on R3. > > > > It should look something like this: > > > > Voice-translation-rule 1 > > Rule 1 /^32143/ /3/ > > > > Or (I see two different called numbers below) > > Voice translation-rule 1 > > Rule 1 /^\+3432143/ /3/ > > > > Then create the profile and apply to voice-port > > > > Voice-translation-profile PSTN-IN > > Translate called 1 > > > > Voice-port 0/0/0:15 > > Translation-profile incoming PSTN-IN > > > > Jeff > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Rafay Aslam > *Sent:* Monday, November 29, 2010 1:22 PM > > *To:* Randall Crumm > *Cc:* [email protected] > *Subject:* Re: [OSL | CCIE_Voice] Lab 4A > > > > Hi > > Attach is a complete PSNT Config. > > On Mon, Nov 29, 2010 at 3:12 PM, Randall Crumm < > [email protected]> wrote: > > Can you send your voice translation rule/profile and how it is applied to > the voice port? > > > > *From:* Rafay Aslam [mailto:[email protected]] > *Sent:* Monday, November 29, 2010 12:11 PM > *To:* Randall Crumm > *Cc:* [email protected] > *Subject:* Re: [OSL | CCIE_Voice] Lab 4A > > > > Hi > > I have inital configuration loaded from PSTN router, here is debug from > PSTN Router, I am calling from PSTN Phone to 3214-3005, so basically I want > to see if my translation pattern works on BR2 Router whyic > > > > PSTN-WAN# > Nov 29 20:07:25.135: ISDN Se0/1/0:23 Q931: Ux_DLRelInd: DL_REL_IND received > from L2 > Nov 29 20:07:28.499: ISDN Se0/0/1:23 Q931: Ux_DLRelInd: DL_REL_IND received > from L2 > Nov 29 20:07:30.063: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type > 0xD is 0x0 0x0, Calling num 999 > Nov 29 20:07:30.067: ISDN Se0/0/0:23 Q931: Sending SETUP callref = 0x0080 > callID = 0x8001 switch = primary-ni interface = Network > Nov 29 20:07:30.067: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = > 0x0080 > Bearer Capability i = 0x8090A2 > Standard = CCITT > Transfer Capability = Speech > Transfer Mode = Circuit > Transfer Rate = 64 kbit/s > Channel ID i = 0xA98381 > Exclusive, Channel 1 > Progress Ind i = 0x8583 - Origination address is non-ISDN > Display i = 'Emergency Services' > Calling Party Number i = 0x0080, '999' > Plan:Unknown, Type:Unknown > Called Party Number i = 0x80, '+3432143005' > Plan:Unknown, Type:Unknown > Nov 29 20:07:30.119: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref > = 0x8080 > Channel ID i = 0xA98381 > Exclusive, Channel 1 > Nov 29 20:07:30.131: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8 callref > = 0x8080 > Cause i = 0x8081 - Unallocated/unassigned number > Nov 29 20:07:30.135: ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8 callref = > 0x0080 > Nov 29 20:07:30.143: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8 > callref = 0x8080 > Nov 29 20:07:30.155: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type > 0xD is 0x0 0x0, Calling num 999 > Nov 29 20:07:30.155: ISDN Se0/0/0:23 Q931: Sending SETUP callref = 0x0081 > callID = 0x8002 switch = primary-ni interface = Network > Nov 29 20:07:30.155: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = > 0x0081 > Bearer Capability i = 0x8090A2 > Standard = CCITT > Transfer Capability = Speech > Transfer Mode = Circuit > Transfer Rate = 64 kbit/s > Channel ID i = 0xA98381 > Exclusive, Channel 1 > Progress Ind i = 0x8583 - Origination address is non-ISDN > Display i = 'Emergency Services' > Calling Party Number i = 0x0080, '999' > Plan:Unknown, Type:Unknown > Called Party Number i = 0x80, '32143005' > Plan:Unknown, Type:Unknown > Nov 29 20:07:30.183: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref > = 0x8081 > Channel ID i = 0xA98381 > Exclusive, Channel 1 > Nov 29 20:07:30.191: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8 callref > = 0x8081 > * Cause i = 0x8081 - Unallocated/unassigned number** > *Nov 29 20:07:30.195: ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8 callref > = 0x0081 > Nov 29 20:07:30.203: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8 > callref = 0x8081 > Nov 29 20:07:34.139: ISDN Se0/1/0:23 Q931: Ux_DLRelInd: DL_REL_IND received > from L2 > Nov 29 20:07:37.499: ISDN Se0/0/1:23 Q931: Ux_DLRelInd: DL_REL_IND received > from L2 > > On Mon, Nov 29, 2010 at 12:04 PM, Randall Crumm < > [email protected]> wrote: > > HI, > > If you can call OB you still need to make sure your config for IB is > correct. > > > > You need an IB dial peer and a translation rule to strip down the called > number to 3001 > > > > HTH > > > > Randall > > > > > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Rafay Aslam > *Sent:* Monday, November 29, 2010 8:24 AM > *To:* [email protected] > *Subject:* [OSL | CCIE_Voice] Lab 4A > > > > Hi > > I am doing Lab 4A, I can call from my BR2 Router to 999 or 911 which is > PSTN Phone but from PSTN Phone I am unable to call my BR2 Phones ie > 3214-3001 > > Regards > > > > Legal Disclaimer: The information contained in this message may be > privileged and confidential. It is intended to be read only by the > individual or entity to whom it is addressed or by their designee. If the > reader of this message is not the intended recipient, you are on notice that > any distribution of this message, in any form, is strictly prohibited. If > you have received this message in error, please immediately notify the > sender and delete or destroy any copy of this message > > > > >
BR2-RTR# BR2-RTR# BR2-RTR#sh run Building configuration... Current configuration : 7089 bytes ! ! Last configuration change at 22:58:06 CET Mon Nov 29 2010 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BR2-RTR ! boot-start-marker warm-reboot boot-end-marker ! logging message-counter syslog logging buffered 4096 ! no aaa new-model memory-size iomem 20 clock timezone CET 1 clock summer-time CET recurring 1 Sun Apr 1:00 last Sun Oct 1:00 network-clock-participate wic 0 ! dot11 syslog ip source-route ! ! ip cef ip dhcp excluded-address 10.10.202.1 10.10.202.49 ip dhcp excluded-address 10.10.202.70 10.10.202.254 ! ip dhcp pool BR2-Phone network 10.10.202.0 255.255.255.0 default-router 10.10.202.1 option 150 ip 10.10.110.3 ! ! no ip domain lookup no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! isdn switch-type primary-ni ! ! ! voice service voip allow-connections sip to sip sip bind control source-interface FastEthernet0/1.400 bind media source-interface FastEthernet0/1.400 registrar server expires max 600 min 60 ! ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! ! ! ! voice class h323 1 h225 timeout tcp establish 3 ! ! ! ! ! ! ! ! ! ! voice register global mode cme source-address 10.10.202.1 port 5060 max-dn 3 max-pool 3 load 7960-7940 P0S3-08-6-00 load 7941 SIP41.8-4-1S authenticate register time-format 24 date-format D/M/Y tftp-path flash: create profile sync 0000351444223695 ! voice register dn 1 number 3005 name Br2Ph3 ! voice register dn 2 number 3006 ! voice register dn 3 number 3008 ! voice register template 1 dialplan 1 no conference enable ! voice register dialplan 1 type 7940-7960-others pattern 1 3... pattern 2 999 ! voice register pool 1 id mac 001D.A291.0A94 type 7941 number 1 dn 1 template 1 dtmf-relay rtp-nte username 3005 password cisco description 3214-3005 codec g711ulaw ! voice register pool 2 id mac 0000.0000.3008 number 1 dn 3 template 1 dtmf-relay rtp-nte username 3008 password cisco description 3214-3008 codec g711ulaw ! ! voice translation-rule 1 rule 1 /^\(3...\)$/ /3214\1/ ! voice translation-rule 2 rule 1 /^32143/ /3/ rule 2 /^\+3432143/ /3/ ! voice translation-rule 3000 rule 1 /^3000$/ /1001/ ! ! voice translation-profile 3000 translate called 3000 ! voice translation-profile 4digitDNIS translate calling 2 ! voice translation-profile 8digitANI translate calling 1 ! ! voice-card 0 ! ! ! ! ! archive log config hidekeys ! ! ! ! ! controller T1 0/0/0 pri-group timeslots 1-3,24 ! controller T1 0/0/1 ! ! ! ! ! interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point h323-gateway voip bind srcaddr 10.10.110.3 ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface Service-Engine0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address duplex auto speed auto ! interface FastEthernet0/1.200 encapsulation dot1Q 200 native ip address 10.10.102.1 255.255.255.0 ! interface FastEthernet0/1.400 description Phone Interface encapsulation dot1Q 400 ip address 10.10.202.1 255.255.255.0 ! interface FastEthernet0/3/0 switchport trunk native vlan 200 switchport mode trunk switchport voice vlan 400 ! interface FastEthernet0/3/1 ! interface FastEthernet0/3/2 ! interface FastEthernet0/3/3 ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bchan-number-order ascending isdn outgoing display-ie no cdp enable ! interface Serial1/0 no ip address encapsulation frame-relay IETF no fair-queue frame-relay lmi-type ansi ! interface Serial1/0.1 point-to-point ip address 10.10.112.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 102 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 no ip address shutdown ! interface Serial1/3 no ip address shutdown ! interface Vlan1 no ip address ! interface Vlan200 description DATA BR2 Interface no ip address shutdown ! interface Vlan400 description PHONES BR2 Interface no ip address shutdown ! router ospf 1 router-id 10.10.202.1 log-adjacency-changes network 10.10.0.0 0.0.255.255 area 0 ! ip forward-protocol nd ip http server ip http authentication local no ip http secure-server ip http path flash:/gui ! ! ! ! ! ! ! ! ! tftp-server flash:P00308000500.bin tftp-server flash:P00308000500.loads tftp-server flash:P00308000500.sb2 tftp-server flash:P00308000500.sbn tftp-server flash:P0S3-08-6-00.sb2 tftp-server flash:P0S3-08-6-00.loads tftp-server flash:P003-08-6-00.sbn tftp-server flash:P003-08-6-00.bin tftp-server flash:7941SIP/term61.default.loads alias term61.default.loads tftp-server flash:7941SIP/term41.default.loads alias term41.default.loads tftp-server flash:7941SIP/SIP41.8-4-1S.loads alias SIP41.8-4-1S.loads tftp-server flash:7941SIP/jar41sip.8-4-0-79.sbn alias jar41sip.8-4-0-79.sbn tftp-server flash:7941SIP/dsp41.8-4-0-79.sbn alias dsp41.8-4-0-79.sbn tftp-server flash:7941SIP/cvm41sip.8-4-0-79.sbn alias cvm41sip.8-4-0-79.sbn tftp-server flash:7941SIP/cnu41.8-4-0-79.sbn alias cnu41.8-4-0-79.sbn tftp-server flash:7941SIP/apps41.8-4-0-79.sbn alias apps41.8-4-0-79.sbn ! control-plane ! ! ! voice-port 0/0/0:23 translation-profile incoming 4digitDNIS ! ccm-manager fax protocol cisco ! mgcp fax t38 ecm ! ! ! dial-peer voice 999 pots translation-profile outgoing 8digitANI destination-pattern 999 port 0/0/0:23 forward-digits 3 ! dial-peer voice 100 pots incoming called-number . direct-inward-dial ! dial-peer voice 1 voip incoming called-number . ! dial-peer voice 901134 pots destination-pattern 901134T port 0/0/0:23 ! dial-peer voice 3000 voip translation-profile outgoing 3000 destination-pattern 3000 voice-class codec 1 voice-class h323 1 session target ipv4:10.10.210.11 no vad ! dial-peer voice 3001 voip translation-profile outgoing 3000 preference 1 destination-pattern 3000 voice-class codec 1 voice-class h323 1 session target ipv4:10.10.210.10 no vad ! ! ! ! gatekeeper shutdown ! ! telephony-service no auto-reg-ephone max-ephones 1 max-dn 2 ip source-address 10.10.110.3 port 2000 load 7960-7940 P00308000500 time-format 24 date-format dd-mm-yy max-conferences 8 gain -6 web admin system name admin password cisco dn-webedit transfer-system full-consult create cnf-files version-stamp 7960 Nov 28 2010 05:14:00 ! ! ephone-template 1 softkeys connected Hold Endcall Trnsfer Acct Flash Park ! ! ephone-dn 1 octo-line number 3001 description 32143001 name Br2Ph1 ! ! ephone-dn 2 octo-line number 3002 description 3214-3002 ! ! ephone 1 device-security-mode none mac-address 0002.B9AF.B6DB ephone-template 1 max-calls-per-button 5 busy-trigger-per-button 3 type 7960 button 1:1 ! ! ! line con 0 line aux 0 line 194 no activation-character no exec transport preferred none transport input all transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh line vty 0 4 login ! scheduler allocate 20000 1000 ntp server 10.10.100.2 end BR2-RTR# BR2-RTR# BR2-RTR#
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
