Hi All, CME phone is able to watch the status of CUCM phone but reverse is not working.
config on CME presence presence call-list server 14.160.108.20 // .20 is sub max-subscription 120 watcher all allow subscribe presence enable sip-ua presence enable ephone 2 device-security-mode none mac-address 0022.9059.843D ephone-template 1 presence call-list blf-speed-dial 2 2001 label "2001 dial-peer voice 321 voip destination-pattern 2001 session protocol sipv2 session target ipv4:14.160.108.20 incoming called-number . on cucm phone1 (2001) has blf-speed dial to 4000 (CME phone) Route pattern 4XXX (Null partition )to SIP trunk (Towards CME) On SIP trunk , security profile is applied , valid check box ie accept presence sub and accept unsolicited are enabled. DN and trunk are in same presence group. Subscribe CSS can access DN 2001. when 2001 goes off hook , status can be seen on CME phone but other way , its not working. CUCM phone can make a call to CME phone by pressing BLF Speed dial Any missing config here ? Regards, Mritunjay
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
