I was just wondering if forcing MTP (set mtp requiered) on a SIP trunk, will let it recognise the dialled digits. will lab it up tomorrow.
Regards, On Wed, Jan 19, 2011 at 4:15 PM, Miron Kobelski <[email protected]> wrote: > One more thing: > http://www.mail-archive.com/[email protected]/msg16921.html > > You can always add the same physical router as 2 logical gateways on CUCM > by binding SIP/H.323/MGCP signaling to different interfaces. > > > On Wed, Jan 19, 2011 at 15:34, mihal caro <[email protected]> wrote: > >> Hi All >> >> I'm having problems with the Cisco MVA when is set it up on the SIP >> gateway but with H323 it works great. >> >> I can get the IVR working with SIP but when I press 1 to dial an internal >> extension nothing happens and the call drops after 10 sec. If I try the same >> thing but change the dial-peer to h323 and dtmf-relay h245-alphanumeric then >> it works. >> >> I'm just wondering if I will get the same problem on the voice lab and how >> do i configure the gateway, H323 or SIP because Cisco may ask me to add the >> gateway as SIP and then if change it back to h323 to make the MVA work I may >> loose points. >> >> >> any advice please >> >> >> regards. >> >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
