Hi Roger, What i mean is "when the incoming call to shared line answer by phoneB,phoneA line button light up and the ANI display on phoneA." So when try to cBarge in by pressing the line button,it should have the option "cbarge" and "newcall" which defined under the ephone template remote-in-use state.
I don't think i need it during the idle state. Thanks Shingei. On Sat, Feb 26, 2011 at 3:58 PM, Rogers Ochieng <[email protected]>wrote: > I don't get what you mean by "Somehow when SRST,the softkeys > "cbarge"doesn't appear on the phone when the > > shared line was answered by another ip phone" > > Do you mean when you press the shared line on the phone or you want it to > appear in idle state? > > On 25 February 2011 17:42, ShinGei Yong <[email protected]> wrote: > >> Hi Tamer, >> >> Thanks for the link, but it just stated that it doesn't work without any >> further explanation. >> In fact there is a workaround to resolve this by Cisco, pls refer below: >> >> *CSCti11843 Bug Details:* >> >> Shared-line Cbarge remote-in-use softkeys not working in SRST >> Symptom: >> >> For Shared line if you want cbarge you must disable privacy and enable >> remote-in-use softkey under ephone-template. However if you configured SRST >> CME with srst mode auto-provision none or dn privacy setting on the ephone >> remains default which means it is on. Hence you can’t disable privacy. >> >> *Conditions:* >> >> When phones fallback to SRST. >> >> *Workaround:* >> >> Only workaround is to either configure: >> >> ephone 1 >> privacy off >> >> or configure srst mode auto-provision all >> >> >> And yes, i just make it work few min ago. Just that the behavior is odd. >> >> Shingei. >> >> >> >> >> On Fri, Feb 25, 2011 at 10:22 PM, Tamer Ismail <[email protected]> wrote: >> >>> Check following post: >>> >>> http://www.voiceie.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=8;t=002799 >>> >>> it’s saying that cbarge and sharde line privacy are supported only in >>> cme/srst 7.1 not owr version 7.0 >>> >>> >>> >>> Best regards, >>> >>> Tamer Ismail >>> >>> >>> >>> *From:* ShinGei Yong [mailto:[email protected]] >>> *Sent:* Friday, February 25, 2011 4:03 PM >>> *To:* Tamer Ismail; [email protected] >>> *Subject:* Re: [OSL | CCIE_Voice] cBarge in SRST:cbarge softkey not >>> appearing >>> >>> >>> >>> Hi Tamer, >>> >>> Are you sure cBarge is not possible for SRST? >>> I believe this topic has been posted several times since-ever, just that >>> circumstance varies. >>> >>> http://ccieash.wordpress.com/2010/06/21/hardware-conferencing-ios/ >>> >>> Shingei. >>> >>> On Fri, Feb 25, 2011 at 9:39 PM, Tamer Ismail <[email protected]> wrote: >>> >>> As far as I know, we can’t achieve cbarge in SRST. >>> >>> >>> >>> Best regards, >>> >>> Tamer Ismail >>> >>> >>> >>> *From:* [email protected] [mailto: >>> [email protected]] *On Behalf Of *ShinGei Yong >>> *Sent:* Friday, February 25, 2011 1:33 PM >>> *To:* [email protected] >>> *Subject:* [OSL | CCIE_Voice] cBarge in SRST:cbarge softkey not >>> appearing >>> >>> >>> >>> Hi, >>> >>> I'm trying the cbarge during SRST. I've privacy turn off on my two 7961 >>> ipphone, >>> and has assigned a ephone template with softkeys remote-in-use cbarge >>> newcall. >>> >>> Somehow when SRST,the softkeys "cbarge"doesn't appear on the phone when >>> the >>> shared line was answered by another ipphone with the same DN >>> configured.I've check >>> the below items: >>> >>> 1. Both ipphones have privacy turn off >>> ephone-2[1] Mac:001E.F728.2C0C TCP socket:[2] activeLine:0 REGISTERED in >>> SCCP ver 17/9 >>> mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 >>> caps:8 privacy:0 >>> IP:10.10.202.55 43050 7961 keepalive 6 max_line 5 available_line 3 >>> button 1: dn 1 number 3001 CM Fallback CH1 IDLE CH2 >>> IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 >>> IDLE CH7 IDLE CH8 IDLE >>> button 2: dn 2 number 3080 CM Fallback CH1 IDLE CH2 >>> IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 >>> IDLE CH7 IDLE CH8 IDLE shared >>> Preferred Codec: g711ulaw >>> >>> >>> ephone-3[2] Mac:0019.E8AE.9479 TCP socket:[5] activeLine:0 REGISTERED in >>> SCCP ver 17/9 >>> mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 >>> caps:8 privacy:0 >>> IP:10.10.202.53 38999 7961 keepalive 0 max_line 5 available_line 3 >>> button 1: dn 3 number 3002 CM Fallback CH1 IDLE CH2 >>> IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 >>> IDLE CH7 IDLE CH8 IDLE >>> button 2: dn 4 number 1010 CM Fallback CH1 IDLE CH2 >>> IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 >>> IDLE CH7 IDLE CH8 IDLE >>> button 3: dn 2 number 3080 CM Fallback CH1 IDLE CH2 >>> IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 >>> IDLE CH7 IDLE CH8 IDLE shared >>> Preferred Codec: g711ulaw >>> >>> 2. Conference resources is registered with CME SRST. >>> BR2-RTR(config)#do sh sdspfar uni regi >>> >>> conf-1 Device:br2-cfb TCP socket:[4] REGISTERED in SCCP ver 17/10 >>> actual_stream:8 max_stream 8 IP:10.10.202.1 14335 Conference Dixieland >>> keepalive 3 >>> Supported codec: >>> G711Ulaw >>> G711Alaw >>> G729 >>> G729a >>> G729b >>> G729ab >>> >>> 3. Correct ephone-template assigned >>> >>> ephone-template 1 >>> softkeys remote-in-use CBarge Newcall >>> softkeys idle Newcall Redial Cfwdall >>> >>> 4. Ad-hoc conference configured >>> ephone-dn 10 octo-line >>> number A001 >>> conference ad-hoc >>> preference 5 >>> >>> 5. Telephony-service Setting >>> telephony-service >>> sdspfarm units 2 >>> sdspfarm tag 1 br2-cfb >>> sdspfarm tag 2 br2-xcoder >>> conference hardware >>> srst mode auto-provision none >>> srst ephone template 1 >>> srst dn template 1 >>> srst dn line-mode dual-octo >>> max-ephones 5 >>> max-dn 10 preference 5 no-reg primary >>> ip source-address 10.10.202.1 port 2000 >>> system message CCIE Voice Test >>> time-zone 28 >>> date-format dd-mm-yy >>> voicemail 3600 >>> max-conferences 4 gain -6 >>> moh music-on-hold.au >>> multicast moh 239.1.1.1 port 16384 route 10.10.110.3 10.10.202.1 >>> transfer-system full-consult >>> secondary-dialtone 0 >>> >>> Both phones and router have been reset N time,but the cbarge still >>> doesn't appear. >>> >>> Did i miss out anything? >>> >>> TIA >>> Shingei >>> >>> >>> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
