shutting down WAN does not help on proctorlabs, as you are supposed to have a few Soft Phones connected from your PC. I put an access-list on HQ router:
access-list 101 deny tcp host <your_pc_ip> any eq 2000 !!This will block the softphone from registering access-list 101 deny host <br1/br2 router loopback> any !! this will block MGCP/h323 from being able to communicate with CUCM. access-list 101 permit ip any any inte F0/0.30 ip access-group 101 out Hope this helps, On Sat, Feb 26, 2011 at 6:21 AM, Chevy <chevy.man...@gmail.com> wrote: > Just shut down the WAN interface at the branch. > > Thanks, > > Chevy > On Feb 25, 2011 11:01 PM, "Erwan Erwan" <e_er...@yahoo.com> wrote: > > hi guys, > > > > h > > What is the quickest way to test SRST in proctorlab ? > > > > 1. I felt that using the button menu "SRST" take some time before go to > SRST and back to normal mode > > > > 2. if I use " CCM Group" that just contain " PUB or SUB", it also take > sometime (at least 3 minute). And most of time , I have to enable and > disable the "Call Manager service" > > > > > > Thanks in adv for tips > > > > Rgds > > erwan > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com