All this ways will take 3 mins, the default value for fallback. You can change SRST timeout parameter in device pool page to 5 sec.
Best regards, Tamer Ismail From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccieid1ot Sent: Saturday, February 26, 2011 9:44 AM To: Ilya Rubinchik Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SRST test in proctorlab Ip route ccm ip to null interface. duy ccie #27737 voice tmobile g2 On Feb 26, 2011 1:30 AM, "Ilya Rubinchik" <ilya.rubinc...@followmars.com> wrote: > Just shutdown frame-relay subinterface on hq or branch router. > > > -- > Best regards, > Ilya Rubinchik > Chief UC Engineer > Mars Solutions Ltd. > > Skype: im_citius > Mob: +998 (97) 712-8456 > Office: +998 (71) 290-7364 > > From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Erwan Erwan > Sent: Saturday, February 26, 2011 8:40 AM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] SRST test in proctorlab > > hi guys, > > > What is the quickest way to test SRST in proctorlab ? > > 1. I felt that using the button menu "SRST" take some time before go to SRST and back to normal mode > > 2. if I use " CCM Group" that just contain " PUB or SUB", it also take sometime (at least 3 minute). And most of time , I have to enable and disable the "Call Manager service" > > > Thanks in adv for tips > > Rgds > erwan > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com