Thanks for all the answers.
I did search the services for 1720 and entered gk-trunk.
I'm working on WB2 lab 2 and the output from the PG shows port 1720 and my
output shows 40081 and 33277 respectively below.
The questions in the WB has output and says the port should show 1720 no 40081
and 33277. This is what I am trying to do. The PG did not specify anything
specific as well.
Should I not worry about this?
Randall
________________________________
From: Roger Carpio <roger.car...@gmail.com>
To: Randall Crumm <rrcr...@yahoo.com>
Cc: Online Study <ccie_voice@onlinestudylist.com>
Sent: Monday, May 30, 2011 12:07 PM
Subject: Re: [OSL | CCIE_Voice] Gatekeeper question
CCM service "Device Name of GK-controlled Trunk That Will Use Port 1720"; just
type the trunk name.
Rgs,
Roger Carpio.
On Mon, May 30, 2011 at 11:39 AM, Randall Crumm <rrcr...@yahoo.com> wrote:
Hi,
>How do I get gk-trunk_1 and 2 to repflect port 1720?
>
>
>Thanks,
>Randall
>
>
>HQ-RTR(config)#do show gatekeeper gw
>GATEWAY TYPE PREFIX TABLE
>=========================
>Prefix: 3*
> Zone HQ master gateway list:
> 10.10.110.3:1720 BR2-RTR
>
>
>Prefix: 1#*
> Zone HQ master gateway list:
> 10.10.210.10:40081 GK-TRUNK_1
> 10.10.210.11:33277 GK-TRUNK_2
> Zone HQ prefix 1... priority gateway list(s):
> Priority 5:
> 10.10.210.10:40081 GK-TRUNK_1
> 10.10.210.11:33277 GK-TRUNK_2
> Zone HQ prefix 5... priority gateway list(s):
> Priority 5:
> 10.10.210.10:40081 GK-TRUNK_1
> 10.10.210.11:33277 GK-TRUNK_2
>
>
>
>
>_______________________________________________
>For more information regarding industry leading CCIE Lab training, please
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out
>www.PlatinumPlacement.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
