That should do it. If they do not show the requested port after adding the trunk name to the service parameter I would try resetting the trunk; resetting CCM service, gatekeeper shut/no shut etc.
Rgs, Roger Carpio. On Mon, May 30, 2011 at 1:36 PM, Randall Crumm <rrcr...@yahoo.com> wrote: > > Thanks for all the answers. > > I did search the services for 1720 and entered gk-trunk. > > I'm working on WB2 lab 2 and the output from the PG shows port 1720 and my > output shows 40081 and 33277 respectively below. > > The questions in the WB has output and says the port should show 1720 > no 40081 and 33277. This is what I am trying to do. The PG did not specify > anything specific as well. > > Should I not worry about this? > > Randall > > > > > ------------------------------ > *From:* Roger Carpio <roger.car...@gmail.com> > *To:* Randall Crumm <rrcr...@yahoo.com> > *Cc:* Online Study <ccie_voice@onlinestudylist.com> > *Sent:* Monday, May 30, 2011 12:07 PM > *Subject:* Re: [OSL | CCIE_Voice] Gatekeeper question > > CCM service "Device Name of GK-controlled Trunk That Will Use Port 1720"; > just type the trunk name. > > Rgs, > Roger Carpio. > > On Mon, May 30, 2011 at 11:39 AM, Randall Crumm <rrcr...@yahoo.com> wrote: > > Hi, > How do I get gk-trunk_1 and 2 to repflect port 1720? > > Thanks, > Randall > > HQ-RTR(config)#do show gatekeeper gw > GATEWAY TYPE PREFIX TABLE > ========================= > Prefix: 3* > Zone HQ master gateway list: > 10.10.110.3:1720 BR2-RTR > > Prefix: 1#* > Zone HQ master gateway list: > 10.10.210.10:40081 GK-TRUNK_1 > 10.10.210.11:33277 GK-TRUNK_2 > Zone HQ prefix 1... priority gateway list(s): > Priority 5: > 10.10.210.10:40081 GK-TRUNK_1 > 10.10.210.11:33277 GK-TRUNK_2 > Zone HQ prefix 5... priority gateway list(s): > Priority 5: > 10.10.210.10:40081 GK-TRUNK_1 > 10.10.210.11:33277 GK-TRUNK_2 > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
