keep-conf works in both ephone/ephone-template and voice register pool keep conf has more flexibility
Here are some examples Examples In the following example, extension 3555 initiates a three-way conference. After the conference is established, extension 3555 can press the Confrn soft key to disconnect the last party that was connected and remain connected to the first party that was connected. If extension 3555 hangs up from the conference, the other two parties remain connected if one of them is local to the Cisco Unified CME system. ephone-dn 35 number 3555 ephone 24 button 1:35 keep-conference drop-last local-only In the following example, extension 3666 initiates a three-way conference. After the conference is established, extension 3666 can press the Confrn soft key to disconnect the last party that was connected and remain connected to the first party that was connected. Also, extension 3666 can hang up from a three-way conference to terminate the conference and disconnect all parties or can press the EndCall soft key to leave the conference and keep the other two parties connected. ephone-dn 36 number 3666 ephone 25 button 1:36 keep-conference drop-last endcall In the following example, extension 3777 initiates a three-way conference. After the conference is established, extension 3777 can press the Confrn soft key to disconnect the last party that was connected and remain connected to the first party that was connected. Also, extension 3777 can hang up from a three-way conference to terminate the conference and disconnect all parties or press the EndCall soft key to leave the conference and keep the other two parties connected only if one of the two parties is local to the Cisco Unified CME system. ephone-dn 38 number 3777 ephone 27 button 1:38 keep-conference drop-last endcall local-only In the following example, extension 3999 initiates a three-way conference. After the conference is established, extension 3999 can hang up to terminate the conference and disconnect all parties or press the EndCall soft key to leave the conference and keep the other two parties connected only if one of the two parties is local to the Cisco Unified CME system. ephone-dn 39 number 3999 ephone 29 button 1:39 keep-conference endcall local-only conference drop-mode To configure the mode for terminating ad hoc hardware conferences when parties drop out, use the *conference drop-mode* command in ephone or ephone-template configuration mode. To return to the default, use the *no*form of this command. *conference drop-mode* [*creator* | *local*] *no conference drop-mode* [*creator* | *local*] Syntax Description *creator* Specifies that the active conference terminates when the creator hangs up. *local* Specifies that the active conference terminates when the last local party in the conference hangs up or drops out of the conference. Command Default The conference is not dropped, regardless of whether the creator hangs up, provided three parties remain in the conference. Command Modes Ephone configuration (config-ephone) Ephone-template configuration (config-ephone-template) keep-conference To allow conference initiators to exit from conference calls and to either end or maintain the conference for the remaining parties, use the *keep-conference *command in ephone or ephone-template configuration mode. To return to the default, use the *no* form of this command. *keep-conference* [*drop-last*] [*endcall*] [*local-only*] *no* *keep-conference * Syntax Description *drop-last* (Optional) The action of the Confrn soft key is changed; the conference initiator can press the Confrn soft key (IP phone) or hookflash (analog phone) to drop the last party. *Note *Analog phones connected to the Cisco Unified CME system through a Cisco VG 224 require Cisco IOS Release 12.3(11)YL1 or a later release to use this feature. *endcall* (Optional) The action of the EndCall soft key is changed; the conference initiator can hang up or press the EndCall soft key to leave the conference and keep the other two parties connected. *Note *If this option is not enabled, pressing the EndCall soft key terminates the conference and disconnects all parties. *local-only* (Optional) The conference initiator can hang up to end the conference and leave the other two parties connected only if one of the remaining parties is local to the Cisco Unified CME system (an internal extension). Defaults A conference initiator can hang up or press the EndCall soft key to end a conference and disconnect all parties or press the Confrn soft key to drop only the last party that was connected to the conference. On Thu, Sep 1, 2011 at 9:37 AM, Ken Wyan <[email protected]> wrote: > Hi, > > I want to drop confernce unless local parties are still connected. (CME) > > Can I use any of these methods? > > METHOD 1 > ephone 1 > conference drop-mode local > > METHOD 2 > ephone 1 > keep-conference local-only > > Any difference of 2 methods? > > Wyan > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
