A lot of times for me at least AAR would work after I reboot the routers.

Edgar

On Wed, Nov 14, 2012 at 10:05 PM, Bill <[email protected]> wrote:

> So you can see the call go out the pstn at HQ and arrive at SB but you get
> busy?
>
> What is the error or reason for busy?
>
> Normally, I do not put anything but aar pt in aar CSS.  I the assign the
> aar CSS to the device level.  I assign the aar group to the line level.  On
> the target I set the aar number, uncheck the box and put aar as its CSS.
>
> Bill
>
>
> On Nov 14, 2012, at 7:08 PM, "Barrera, Hugo" <[email protected]>
> wrote:
>
>  Hi,****
>
> ** **
>
> I am doing AAR, Lab 6 Volume 1, but I just can’t get it to work correctly.
> The following is my programming task list and what I witnessed:****
>
> ** **
>
> Call flow = HQ Phone 2 x5002 calls BR1 Phone 2 x1002 ****
>
> ** **
>
> 1.      Enabled AAR globally in service parameters ****
>
> 2.      Created my AAR-PT and AAR-CSS****
>
> o   The AAR-CSS contains the AAR-PT and Internal-PT****
>
> 3.      Both my phones have their corresponding Ext Phone Mask (10
> digits) ****
>
> 4.      Created my (1) AAR Group named = HQ-BR1-AARGroup****
>
> o   Prefix for this AAR group is “91” ****
>
> 5.      Assigned the above AAR group at the line and device level of both
> phones ****
>
> 6.      Built out separate AAR Rout Patterns pointing to new Route List **
> **
>
> ** **
>
> Troubleshooting:****
>
> I ran my debugs on both gateways and could see the call from CUCM to the
> HQ-RTR I could also see the incoming call from PSTN to BR1-RTR however I
> still received a busy?****
>
> ** **
>
> Any ideas would be appreciated! ****
>
> ** **
>
> ** **
>
> *- Hugo*****
>
> ** **
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to