Thank you ! Yes you are right BLS speed for call park slot feature is in CME 7.1. However I am running CME 7.0.1 in my lab rack that is why it did not work.
Regards, Ramcharan Arya On Mon, Nov 19, 2012 at 6:30 PM, William Bell <[email protected]> wrote: > IIRC, using BLF speed dial to monitor call park slot status was introduced > in CME 7.1. You can use monitor on a line. I just tested this and it > appears to work as desired. Here is a sample: > > > ephone-dn 6 > number 1001 no-reg primary > park-slot > allow watch > ! > ephone 1 > device-security-mode none > description SiteC Phone 1 > mac-address AAAA.BBBB.CCCC > ephone-template 2 > type 7961 > no dnd feature-ring > button 1f1 2c3,4 3m6 > ! > > > With the above config, if I initiate a Call Park from any station on the > CME button 3 on ephone 1 lights up. The button can also be used to "speed > dial" the call park slot. > > > HTH. > > -Bill > > -- > William Bell > blog: http://ucguerrilla.com > twitter: @ucguerrilla > > > > On Nov 19, 2012, at 5:25 PM, Ramcharan Arya wrote: > > Hello, > > Need help on setting up presence in CME for call park. I have enable > presence and BLF Speeddial when I park call BFL does not glow. > > Can you please suggest any other way to monitor call park slot. > > Thanks, > Ramcharan Arya > > > On Mon, Nov 12, 2012 at 2:13 PM, Ramcharan Arya > <[email protected]>wrote: > >> Hello, >> >> I have am working on CME call pickup excercise. I have testing call park >> and pickup, When I press pickup software I am getting getting fast tone. >> >> >> Here is my configuration. >> >> >> ephone-dn 17 octo-line >> number 4731 >> label 4731 >> description BR2 Ph1 >> ! >> ephone-dn 18 octo-line >> number 4732 >> label 4732 >> description BR2 Ph2 >> ! >> ephone-dn 19 octo-line >> number 4733 >> label 4733 >> Description BR2 Ph3 >> >> ! >> ephone-template 1 >> softkeys idle Newcall Pickup Redial Dnd >> softkeys connected Hold Park Trnsfer Endcall Flash >> >> ephone 15 >> ephone-template 1 >> device-security-mode none >> mac-address 0CD9.9690.6FC2 >> type 7962 >> button 1:17 >> ! >> ephone 17 >> ephone-template 1 >> device-security-mode none >> mac-address 0CD9.9690.6CA8 >> type 7962 >> button 1:18 >> ! >> ephone 18 >> ephone-template 1 >> device-security-mode none >> mac-address 34BD.C82D.A1D7 >> type 7962 >> button 1:19 >> ! >> ephone-dn 16 >> number 4735 >> park-slot timeout 20 limit 2 recall >> description park slot for All Users >> ! >> telephony-service >> call-park system application >> ! >> >> >> Testing procedure: >> >> 1. Call from ext 4731 to ext 4732 >> 2. On ext 4732 answer the phone and put call on park >> 3. When I press pickup softkey to retrieve call on park is not working >> getting busy tone. >> >> >> Can you please tell me if I am doing something wrong. >> >> Thanks, >> Ramcharan Arya >> CCIE # 28926(R&S) >> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
