I don't have an answer for you. However, I can confirm that I have noticed the same behavior. When I have associated custom tones for join/leave events, I only hear the tone on join. Nada on leave. I haven't figured it out yet.
-Bill -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Feb 17, 2013, at 12:39 PM, Jason Lee wrote: > All, > > I have continually struggled with custom tones for a while now. I'm working > on the 5LB Lab 1 today and have the preserve CBarge configuration in place. > As I have it configured I'm expecting to hear one tone on entry and 2 when a > call exits the call. > > What I'm actually hearing is 2 on join and nothing on leave. > > Here's the config. Can anyone see anything that I'm doing wrong? > > > > r2800-2j-b#sh run > Building configuration... > > > Current configuration : 9095 bytes > ! > ! Last configuration change at 17:35:03 GMT Sun Feb 17 2013 > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > no service password-encryption > ! > hostname r2800-2j-b > ! > boot-start-marker > boot system flash > boot-end-marker > ! > card type e1 0 1 > card type t1 1 > logging message-counter syslog > enable password cisco > ! > no aaa new-model > clock timezone GMT 0 > no network-clock-participate slot 1 > network-clock-participate wic 1 > network-clock-select 1 E1 0/1/0 > ! > dot11 syslog > ip source-route > ! > ! > ip cef > ip dhcp excluded-address 192.168.106.0 192.168.106.119 > ip dhcp excluded-address 192.168.106.130 192.168.106.255 > ! > ip dhcp pool phn2 > host 192.168.106.130 255.255.255.0 > client-identifier 01c8.f9f9.d739.77 > default-router 192.168.106.1 > option 150 ip 192.168.100.100 192.168.100.101 > ! > ip dhcp pool voip > network 192.168.106.0 255.255.255.0 > option 150 ip 192.168.100.100 192.168.100.101 > default-router 192.168.106.1 > ! > --More-- > .Feb 17 17:35:03.037: %SYS-5-CONFIG_I: Configured from console ! e > no ip domain lookup > no ipv6 cef > ! > multilink bundle-name authenticated > ! > ! > ! > ! > isdn switch-type primary-net5 > ! > ! > ! > voice service voip > allow-connections h323 to h323 > allow-connections h323 to sip > allow-connections sip to h323 > allow-connections sip to sip > fax protocol cisco > ! > ! > ! > voice class codec 1 > codec preference 1 g711ulaw > codec preference 2 g729r8 > ! > ! > ! > ! > voice class h323 1 > h225 timeout tcp establish 3 > ! > ! > ! > ! > voice class custom-cptone leave > dualtone conference > frequency 300 > cadence 400 400 400 > ! > voice class custom-cptone join > dualtone conference > frequency 300 > cadence 400 > ! > ! > ! > ! > ! > ! > ! > ! > voice translation-rule 1 > rule 1 /.+\(....\)$/ /\1/ > ! > voice translation-rule 9 > rule 1 /^[0-8]/ /9\0/ > ! > voice translation-rule 23 > rule 1 /2.../ /001202555\0/ type any international plan any isdn > rule 2 /3.../ /001408387\0/ type any international plan any isdn > ! > voice translation-rule 97 > rule 4 // // type any subscriber plan any isdn > ! > voice translation-rule 910 > rule 4 // // type any national plan any isdn > ! > voice translation-rule 911 > rule 4 // // type any unknown plan any unknown > ! > voice translation-rule 971 > rule 1 /4.../ /+44207796\0/ > rule 4 // // type any subscriber plan any isdn > ! > voice translation-rule 9011 > rule 4 // // type any international plan any isdn > ! > voice translation-rule 9101 > rule 1 /4.../ /+44207796\0/ > rule 4 // // type any national plan any isdn > ! > voice translation-rule 9111 > rule 1 /4...$/ /7796\0/ > rule 4 // // type any unknown plan any unknown > ! > voice translation-rule 90111 > rule 1 /4.../ /+44207796\0/ > rule 4 // // type any international plan any isdn > ! > ! > voice translation-profile 23 > translate called 23 > ! > voice translation-profile 9 > translate calling 1 > translate called 9 > ! > voice translation-profile 9011 > translate calling 90111 > translate called 9011 > ! > voice translation-profile 910 > translate calling 9101 > translate called 910 > ! > voice translation-profile 911 > translate calling 9111 > translate called 911 > ! > voice translation-profile 97 > translate calling 971 > translate called 97 > ! > voice translation-profile strip > translate called 1 > ! > ! > voice-card 0 > dsp services dspfarm > ! > ! > ! > ! > ! > archive > log config > hidekeys > ! > ! > ! > ! > ! > controller E1 0/1/0 > pri-group timeslots 1-3,16 > ! > controller E1 0/1/1 > ! > controller T1 1/0 > cablelength long 0db > ! > controller T1 1/1 > cablelength long 0db > ! > ! > ! > ! > ! > interface Loopback0 > ip address 192.168.96.2 255.255.255.255 > h323-gateway voip bind srcaddr 192.168.96.2 > ! > interface GigabitEthernet0/0 > no ip address > duplex auto > speed auto > ! > interface GigabitEthernet0/0.105 > encapsulation dot1Q 105 native > ip address 192.168.105.1 255.255.255.0 > ! > interface GigabitEthernet0/0.106 > encapsulation dot1Q 106 > ip address 192.168.106.1 255.255.255.0 > ! > interface Service-Engine0/0 > ip unnumbered GigabitEthernet0/0.106 > service-module ip address 192.168.106.2 255.255.255.0 > service-module ip default-gateway 192.168.106.1 > ! > interface GigabitEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface FastEthernet0/3/0 > shutdown > ! > interface FastEthernet0/3/1 > shutdown > ! > interface FastEthernet0/3/2 > shutdown > ! > interface FastEthernet0/3/3 > shutdown > ! > interface Serial0/0/0 > no ip address > encapsulation frame-relay IETF > no fair-queue > frame-relay lmi-type ansi > ip rsvp bandwidth > ! > interface Serial0/0/0.1 point-to-point > description FR-WAN INTERFACE - DLCI 102 > ip address 192.168.111.10 255.255.255.252 > shutdown > frame-relay interface-dlci 102 > ip rsvp bandwidth 64 > ! > interface Serial0/0/1 > no ip address > shutdown > clock rate 2000000 > ! > interface Serial0/1/0:15 > no ip address > encapsulation hdlc > isdn switch-type primary-net5 > isdn incoming-voice voice > isdn bchan-number-order ascending > isdn outgoing display-ie > no cdp enable > ! > interface Vlan1 > no ip address > ! > router ospf 1 > log-adjacency-changes > network 192.168.0.0 0.0.255.255 area 0 > ! > ip forward-protocol nd > ip route 0.0.0.0 0.0.0.0 Serial0/0/0.1 > ip route 192.168.106.2 255.255.255.255 Service-Engine0/0 > ip http server > no ip http secure-server > ! > ! > ! > nls resp-timeout 1 > cpd cr-id 1 > ! > ! > ! > ! > ! > ! > control-plane > ! > ! > ! > voice-port 0/1/0:15 > translation-profile incoming strip > ! > voice-port 0/2/0 > ! > voice-port 0/2/1 > ! > voice-port 0/2/2 > ! > voice-port 0/2/3 > ! > ! > ! > sccp local Loopback0 > sccp ccm 192.168.106.1 identifier 3 version 7.0 > sccp ccm 192.168.100.100 identifier 2 version 7.0 > sccp ccm 192.168.100.101 identifier 1 version 7.0 > sccp > ! > sccp ccm group 1 > bind interface Loopback0 > associate ccm 1 priority 1 > associate ccm 2 priority 2 > associate ccm 3 priority 3 > associate profile 3 register sc-mtp-rsvp > associate profile 2 register sc-conf > associate profile 1 register sc-xcode > keepalive timeout 3 > switchover method immediate > switchback method immediate > ! > dspfarm profile 1 transcode > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > maximum sessions 4 > associate application SCCP > ! > dspfarm profile 2 conference > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > codec g729br8 > maximum sessions 2 > conference-join custom-cptone join > conference-leave custom-cptone leave > associate application SCCP > ! > dspfarm profile 3 mtp > codec g729r8 > rsvp > maximum sessions software 100 > associate application SCCP > ! > ! > dial-peer voice 911 pots > translation-profile outgoing 911 > destination-pattern 999$ > port 0/1/0:15 > forward-digits all > ! > dial-peer voice 97 pots > translation-profile outgoing 97 > destination-pattern 9[1-9].......$ > port 0/1/0:15 > forward-digits 8 > ! > dial-peer voice 910 pots > translation-profile outgoing 910 > destination-pattern 91[2-9].........$ > port 0/1/0:15 > forward-digits 11 > ! > dial-peer voice 9011 pots > translation-profile outgoing 9011 > destination-pattern 900T > port 0/1/0:15 > prefix 00 > ! > dial-peer voice 1 pots > incoming called-number . > direct-inward-dial > ! > dial-peer voice 2 voip > translation-profile incoming 9 > destination-pattern 4...$ > voice-class codec 1 > voice-class h323 1 > session target ipv4:192.168.100.101 > incoming called-number . > dtmf-relay h245-alphanumeric > no vad > ! > dial-peer voice 3 voip > preference 1 > destination-pattern 4...$ > voice-class codec 1 > voice-class h323 1 > session target ipv4:192.168.100.100 > dtmf-relay h245-alphanumeric > no vad > ! > dial-peer voice 999 pots > ! > dial-peer voice 4600 voip > destination-pattern 4600$ > session protocol sipv2 > session target ipv4:192.168.106.2 > dtmf-relay sip-notify > codec g711ulaw > no vad > ! > dial-peer voice 23 pots > translation-profile outgoing 23 > destination-pattern [23]...$ > port 0/1/0:15 > forward-digits all > ! > ! > sip-ua > mwi-server ipv4:192.168.106.2 expires 3600 port 5060 transport udp > unsolicited > ! > ! > ! > gatekeeper > shutdown > ! > ! > telephony-service > sdspfarm units 3 > conference hardware > srst mode auto-provision all > srst ephone template 1 > srst dn template 1 > srst dn line-mode octo > max-ephones 25 > max-dn 40 no-reg > ip source-address 192.168.106.1 port 2000 > time-zone 21 > time-format 24 > voicemail 4600 > max-conferences 8 gain -6 > transfer-system full-consult > secondary-dialtone 9 > create cnf-files version-stamp 7960 Feb 16 2013 20:47:40 > ! > ! > ephone-dn-template 1 > call-forward busy 4600 > call-forward noan 4600 timeout 10 > ! > ! > ephone-template 1 > softkeys remote-in-use Newcall CBarge > ! > ! > ephone-dn 1 octo-line > number 4001 > description +442077964001 > name +442077964001 > ephone-dn-template 1 > ! > ! > ephone-dn 2 octo-line > number 4000 > description 4000 > name 4000 > ephone-dn-template 1 > ! > ! > ephone-dn 3 octo-line > number 4002 > description +442077964002 > name +442077964002 > ephone-dn-template 1 > ! > ! > ephone-dn 20 octo-line > number A02 no-reg primary > conference ad-hoc > ! > ! > ephone 1 > privacy off > privacy-button > device-security-mode none > mac-address C8F9.F9D7.545D > ephone-template 1 > button 1:1 2:2 > ! > ! > ! > ephone 2 > device-security-mode none > mac-address C8F9.F9D7.3977 > ephone-template 1 > button 1:3 2:2 > ! > ! > ! > line con 0 > line aux 0 > line 194 > no activation-character > no exec > transport preferred none > transport input all > transport output pad telnet rlogin lapb-ta mop udptn v120 ssh > line vty 0 4 > password cisco > login > ! > scheduler allocate 20000 1000 > ntp server 192.168.96.10 > end > > r2800-2j-b# > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
