My guess is that your calling number was expanded from 4 digits to something
bigger because of you long distance dial peer. Choice one is to use alternate
extensions in Unity connection. If you are not allowed to do that change the
calling number mask on the hunt pilot to XXXX
Sent from my iPhone
On Feb 23, 2013, at 2:09 PM, "Ben John" <benjoh...@hotmail.com> wrote:
> I configured my VM when in SRST when i press the message button it goes to
> the tutorial instead of asking for the pin. Bellow is my config. Any feedback
> why it is going to the tutorial ?
>
>
> call-manager-fallback
> secondary-dialtone 9
> max-conferences 8 gain -6
> transfer-system full-consult
> timeouts interdigit 3
> ip source-address 10.10.65.254 port 2000
> max-ephones 9
> max-dn 9 octo-line preference 9 no-reg
> transfer-pattern .T
> voicemail 2220
> huntstop channel 1
> call-forward pattern .T
> call-forward busy 2220
> call-forward noan 2220 timeout 20
> moh music-on-hold.au
> multicast moh 239.1.1.1 port 16384 route 10.10.65.254 10.10.110.2
> 142.102.65.254 142.1.65.254
> time-zone 8
> time-format 24
>
> dial-peer hunt 2
> num-exp 2220 912025552220
>
>
> Ben
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
