So your getting to the tutorial so that means you are getting to cue but it doesn't see you created a pin
Are you doing the cue config by cli with username scph1 pin 12345 and voicemail mailbox owner scph1 and enable then no tutorial? Or by web page config? Sent from my iPad On Feb 23, 2013, at 12:41 PM, Ben John <benjoh...@hotmail.com> wrote: > I configured my VM when in SRST when i press the message button it goes to > the tutorial instead of asking for the pin. Bellow is my config. Any feedback > why it is going to the tutorial ? > > > call-manager-fallback > secondary-dialtone 9 > max-conferences 8 gain -6 > transfer-system full-consult > timeouts interdigit 3 > ip source-address 10.10.65.254 port 2000 > max-ephones 9 > max-dn 9 octo-line preference 9 no-reg > transfer-pattern .T > voicemail 2220 > huntstop channel 1 > call-forward pattern .T > call-forward busy 2220 > call-forward noan 2220 timeout 20 > moh music-on-hold.au > multicast moh 239.1.1.1 port 16384 route 10.10.65.254 10.10.110.2 > 142.102.65.254 142.1.65.254 > time-zone 8 > time-format 24 > > dial-peer hunt 2 > num-exp 2220 912025552220 > > > Ben > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
