I use this as a strategy for checking my gateway configuration Ensure that your are meeting requirements on the following
1. display-ie 2. BCHAN order selection (Ascending, Descending) 3. BCHAN number 1. How many BCHANs? 1. If not specified create a full PRI. 2. If fractional 1. Set BCHAN Maintenance in Advanced Service Parameters 2. Check the *Check Status *checkbox in GW config 4. Clocking 1. Network clock participate 2. network clock select 1 t10/0/0 5. ISDN Switch-Type 6. Source-Address 7. 911 1. Done in gateway section. 1. Make sure to have routed correctly, SLRG?, 8. Direct Inward Dial 9. clear counters On Wed, Feb 27, 2013 at 3:38 AM, Jamie Parr (jamparr) <jamp...@cisco.com>wrote: > I am also curious as to the grading on the gateways, I received very low > marks on this section. Can anyone help?**** > > ** ** > > Thanks**** > > ** ** > > *Jamie Parr* > Engineer - IT > jamp...@cisco.com > Phone: *+44 20 8824 2641* > Mobile: *+44 7590622049***** > > ** ** > > *From:* ccie_voice-boun...@onlinestudylist.com [mailto: > ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Pixar Perfect > *Sent:* 26 February 2013 19:35 > *To:* Steve Keller; GARY CLARK > *Cc:* CCIE Voice OSL > *Subject:* [OSL | CCIE_Voice] B Channel Busy Out**** > > ** ** > > Gary ..you mentioned B channel busyout on service parameter. in my > understanding this was only needed when you would "download" the GW config > from CCM i.e., ccm-manager config. it doesn't make any sense to use this > service parameter as most of the solution guides (INE, IPXEPERT, 360) do > not encourage the use of ccm-manager config except initial stage of your > config and then disable it. I have heard ppl who passed just using standard > configs but not sure if they did the B channel busy out on service > parameter. **** > > ** ** > > ** ** > > mgcp **** > > mgcp call-agent 10.10.210.11 -->sub**** > > mgcp dtmf ....**** > > mgcp bind ... (2x2)**** > > ** ** > > ccm-mana fall**** > > ccm-mana music**** > > ccm-mana mgcp**** > > ccm-mana red 10.10.210.10 --> pub**** > > ** ** > > ** ** > > if B channel status is *really graded *on the exam then it is one of > those things that doesn't make sense to have it there but is needed to > score points [image: Emoji]**** > > ** ** > > experts,**** > > any comments or advise from the recent Experts ?**** > > ** ** > > ** ** > > PIXAR**** > > ** ** > > ** ** > ------------------------------ > > Date: Mon, 25 Feb 2013 14:31:12 -0500 > From: skeller...@gmail.com > To: garyclark...@gmail.com > CC: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] lab---->7 failed for 1%**** > > I recieved 29% in RTP on GW Signalling section and Call Routing as well. I > am very discouraged i could score very low marks on these sections as i > took my time and felt like i had nailed them. I scored really well in all > other areas but failed because of these 2 sections. It is a mystery to me > what the proctor is doing to arrive at that score, when all my calls > worked, the debugs matched the requirements, i was binding to the correct > interfaces, setting up the correct protocol and channels,etc. I would love > to hear what insight folks have as to why the scores could be so low when > everything looked to be working beautifully, without breaking NDA of course. > **** > > **** > > thanks**** > > steve**** > > > > **** > > On Mon, Feb 25, 2013 at 1:54 PM, GARY CLARK <garyclark...@gmail.com> > wrote:**** > > Hi friends, > > I got lab 7 in SJC and i completed that in 6 hrs and tested for 2 hrs time. > **** > > I thought i have passed 1000% but when i saw my result i was surprised.*** > * > > I almost got everywhere 100% except VG / 29% which was 17 marks section.** > ** > > Same story with my friends do anyone got 100% in VG for lab 7 **** > > If anyone interested to share the hidden secrets then welcome as people > are getting lab 7 repeating now very eager to understand what could be > wrong. > > Please email me for further discussion.**** > > We 3 friends attempted out of which i also did busy out channel but that > also did not helped its 29% only why so **** > > ** ** > > Regards**** > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com**** > > > > _______________________________________________ For more information > regarding industry leading CCIE Lab training, please visit > www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com**** > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com