> 4. WLC (LAG) - the command should be 'mls qos trust cos'. What about native vlan not having a dot1 tag with cos field?
> 9. Wired IP Phone: This one I have been struggling with. The fact they would > say not to use AutoQoS to me would suggest that they want SRR (for 3560) or > WRR (6500). Don't forget the hardware list means the phone could be either > on a 3560/2960 or 6500. Then there are the different modules in the 6500 > which have different queues and as such different QoS configurations. I need > to work on this one some more. You could do a: copy running flash:before-qos.cfg conf term int fas0/3 auto qos voip trust (or cisco-phone) end sh run inter fa0/3 (copy to notepad) config replace flash:before-qos.cfg then you have the auto-qos best practice parameters and can copy them to your interface from notepad and you did'nt configure the working config with auto-qos command. /Ralph _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
