WLC (LAG) - good point on that there is no cos on the native vlan on a dot1q trunk. My understanding would not to put the management/ap-manager in the native to ensure you get cos markings.
On 24 February 2011 02:23, Ralph Olsen <[email protected]> wrote: > > 4. WLC (LAG) - the command should be 'mls qos trust cos'. > > What about native vlan not having a dot1 tag with cos field? > > > 9. Wired IP Phone: This one I have been struggling with. The fact they > would > > say not to use AutoQoS to me would suggest that they want SRR (for 3560) > or > > WRR (6500). Don't forget the hardware list means the phone could be > either > > on a 3560/2960 or 6500. Then there are the different modules in the 6500 > > which have different queues and as such different QoS configurations. I > need > > to work on this one some more. > > You could do a: > > copy running flash:before-qos.cfg > conf term > int fas0/3 > auto qos voip trust (or cisco-phone) > end > sh run inter fa0/3 (copy to notepad) > config replace flash:before-qos.cfg > > then you have the auto-qos best practice parameters and can copy them > to your interface from notepad and you did'nt configure the working > config with auto-qos command. > > /Ralph >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
