Hi again, I was interpreting the question against the DSG, 2 lines caught my eye: A) Only subnet shared between the 2 sites should participate in EIGRP as well as the HQNetMgmt subnet (VL 10) B) Use as few commands as possible for this exercise....
For part a, I was really thinking in the line that only the point to point link between HQ and MO should be declare in CAT2 and CAT4 while VLAN 10 network command should declare in CAT1 & 2. CAT1: router eigrp 1 passive default no passive vl 10 network 10.10.10.0 0.0.0.255 red connec no au (there is only one static default route listed in CAT1 config hence not included as part of eigrp) CAT2: Router eigrp 1 passive default no passive vl 10 no passive f0/22 network 10.10.10.0 0.0.0.255 network 172.16.99.0 0.0.0.3 red con red sta ! Only 2 static route here: 1 to CME, 1 to home network via vlan 1(if I interpret home network correctly)) no au CAT4: router eigrp 1 passive default no pass f0/22 network 172.16.99.0 0.0.0.3 no au red con With these, I can get all subnets from CAT4 in CAT 1&2 and vice versa albeit having them all as D EX routes. But the question in concern did not mentioned anything about the type of routes expected. Is this interpretation plausible or somewhere somehow my interpretation skills sux, as with my english too. Alvin B. (P.S As you can already see from my questions so far, I've justed started the labs. Already went thru Lab1, bull dozing thru Lab 2 and so on now..please be patient with me for those who r nearing the final labs) _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
