Configure the per-wlan radius servers in the config options for the IPX4 SSID. It'll use specifically-selected radius servers even if the network box is not checked.
On Mon, Apr 25, 2011 at 8:14 PM, Leigh Jewell <[email protected]>wrote: > This lab is all about configuring a number of SSID's on the group of > controllers. Looking at WLC1 you are asked to create three SSID's: > > IPX1: web-auth (must not use radius) > IPX2: WEP Key > IPX4: WPA with EAP-TLS on an ACS server > > The problem is the requirement for not to use Radius for the web-auth SSID > (IPX1). My understanding is with web-auth the local database is checked > first and then it will check any Radius servers configured. In the solution > guide for this lab it work around this by unchecking the 'Network' box > against the defined radius server and just leaving the management selected. > > The problem I can see with that Radius authentication is still needed for > IPX4 and unchecking this box effectively stops this SSID from working. > > Comments and thoughts welcome. > > Cheers, > Leigh > > -- > CCIE Blog - http://leigh-cciewireless.blogspot.com/ > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
