Now that does makes sense. Did you find this in the configuration guide or trial and error ?
Thanks for the quick response. Regards, Leigh On 26 April 2011 12:02, Gabriel <[email protected]> wrote: > Configure the per-wlan radius servers in the config options for the IPX4 > SSID. It'll use specifically-selected radius servers even if the network box > is not checked. > > On Mon, Apr 25, 2011 at 8:14 PM, Leigh Jewell <[email protected]>wrote: > >> This lab is all about configuring a number of SSID's on the group of >> controllers. Looking at WLC1 you are asked to create three SSID's: >> >> IPX1: web-auth (must not use radius) >> IPX2: WEP Key >> IPX4: WPA with EAP-TLS on an ACS server >> >> The problem is the requirement for not to use Radius for the web-auth SSID >> (IPX1). My understanding is with web-auth the local database is checked >> first and then it will check any Radius servers configured. In the solution >> guide for this lab it work around this by unchecking the 'Network' box >> against the defined radius server and just leaving the management selected. >> >> The problem I can see with that Radius authentication is still needed for >> IPX4 and unchecking this box effectively stops this SSID from working. >> >> Comments and thoughts welcome. >> >> Cheers, >> Leigh >> >> -- >> CCIE Blog - http://leigh-cciewireless.blogspot.com/ >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com <http://www.platinumplacement.com/> >> >> > -- CCIE Blog - http://leigh-cciewireless.blogspot.com/
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
