Jason, Would it be possible please either to:
- add version number to the name of the DSG or - post in the forum whenever new version has been released (preferable) Otherwise there is no other way to check the current version of DSG apart from downloading the whole DSG file from the website... Also the latest version is not always uploaded to everyone's account, therefore I am woting for posting updates to group. Many thanks. Regards, Vitaly On Wed, Jun 8, 2011 at 9:50 PM, Jason Boyers <[email protected]> wrote: > 3.7 - Client power - that would accomplish the same thing - correct. > > 3.7 - AP Name - this depends on the client. Therefore, both Aironet > Extensions as well as CDP must be disabled on the radios (including > subinterfaces.) > > 3.8 - I'm presuming that you are discussing native VLANs on the root AP, as > the repeater obviously won't use the Ethernet interface. This was supposed > to have been corrected in the DSG, but I see that it was not. I apologize > for that. You are correct - the root AP Ethernet and radio interfaces must > have the same native VLAN in order for the repeater to function properly. > When it's posted, it will be version 2997 of the DSG. This involves changed > Cat1, Fa0/2 so that VLAN 12 is the native VLAN on the trunk, as well as > changing Fa0.12 so that it is native. > > > Jason Boyers - CCIE #26024 (Wireless) > Technical Instructor - IPexpert, Inc. > Mailto: *[email protected] > * > On Wed, Jun 8, 2011 at 2:18 PM, Raul Manzano <[email protected]> wrote: > >> Hi again. >> >> I was a little bit active today :) and I took the day. >> >> I have some doubts about some tasks for lab 3 >> >> 3.7: "Clients should also receive a notification to transmit at the same >> power level". Could be valid "power client local"???, Really you are telling >> to the client that use the same power level that the AP. >> 3.7: AP name hidden: In the same way as before, this issue was discussed >> long time ago; but yesterday searching for a "configuration example for >> Bridges" I found this document of FAQ in which they talk about how to see >> the name of the AP for the clients (ACU) and explain that only enabling >> Aironet extensions, and if you don´t want to see in ACU, simply you disable >> the extensions. Thoughs??? (second question of troubleshooting FAQ). >> >> >> http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml >> >> 3.8: Native VLAN, I remember that in other occasions and discussed this >> issue. Really in repeater mode it only works in my lab when the VLAN in the >> ethernet and radio interfaces is in the same way (Native), for exalple, if I >> use dot0.12 with vlan 12 and eth0.12 vlan vlan 12 native the client never >> does not get an IP address. >> >> Best regards. >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > -- Regards, Vit
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
