Guys,

I believe I have found what 'breakes' the config below. If you configure a
link between Root AP and WGB for reliable multicasting ('*station-role
workgr multicast mode infrastru*' on WGB) you will have to configure '*
infrastructure-client*' on the Root AP. As soon as you apply '*
infrastructure-client*,' traffic is not passing through the link between
Root AP and WGB :) The only way to get it working with '*
infrastructure-client*' command is to configure sub-interfaces, if you need
clients connected to WGB to be in the specific Vlan.

I may be wrong, would be nice if someone can cross check it.

Many thanks.

Regards,
Vit

On Wed, Jun 8, 2011 at 10:21 PM, Vit <[email protected]> wrote:

> Hey Raul,
>
> The configs you provided work fine... I have noticed only one discrepancy
> between your configs and mine when this was not working - on the Root AP you
> have '*bridge-group 1*' associated with Dot11Radio0 and FastEthernet0, in
> my case I had '*bridge-group 1*' associated with d0.110 and Fa0.110 (both
> with '*enc dot 110 native*')
>
> To prove my theory I decided to return hardware back to non-working state
> and associated '*bridge-group 1*' with d0.110 and Fa0.110 on the Root AP.
> Then rebooted everything - SW1, Root AAP, WGB AAP and SW2. However, it is
> still working... The only thing I have noticed is that the SVI11 on SW2 gets
> ip address from a DHCP server after 1-2 minutes, and not straightaway. May
> be this was the issue last time when it was not working as I did not wait
> long enough.... Apart from that I do not know what was the reason it was not
> working originally, as I used basic config and rebooted everything as well -
> and not knowing the reason really annoys me.
>
> Many thanks for testing, you are a star :) Big thank you goes to Jason, may
> thanks for sharing the Autonomous APs configs.
>
> Regards,
> Vit
>
> On Wed, Jun 8, 2011 at 11:56 AM, Raul Manzano <[email protected]> wrote:
>
>> Hi Guys.
>>
>> The configs, following the jason“s configuration it work fine on my lab
>> :)
>>
>> Root:
>>
>> dot11 ssid WGB
>>    vlan 12
>>    authentication open
>> !
>> interface Dot11Radio0
>>  !
>>  ssid WGB
>>  !
>>  channel 2412
>>  station-role root
>>  bridge-group 1
>> !
>> interface Dot11Radio0.12
>>  encapsulation dot1Q 12
>>  no ip route-cache
>>  bridge-group 12
>> !
>> !
>> interface FastEthernet0
>>  bridge-group 1
>> !
>> interface FastEthernet0.12
>>  encapsulation dot1Q 12
>>  no ip route-cache
>>  bridge-group 12
>>
>> WGB:
>>
>> !
>> dot11 ssid WGB
>>    authentication open
>> !
>> !
>> interface Dot11Radio0
>>  !
>>  ssid WGB
>>  station-role workgroup-bridge
>>  bridge-group 1
>> !
>> interface FastEthernet0
>>  bridge-group 1
>> !
>> bridge 12 protocol ieee
>> workgroup-bridge client-vlan 12
>> SWITCH:
>>
>> vlan 12
>>
>> !
>> interface GigabitEthernet1/0/1
>>  switchport access vlan 12
>>  switchport mode access
>>  spanning-tree bpdufilter enable
>> !
>> !
>> interface Vlan1
>>  no ip address
>>  shutdown
>> !
>> interface Vlan12
>>  ip address dhcp client-id Vlan12
>> !
>>
>> Both The Switch and WGB gets an IP through DHCP and can ping to the
>> network through the Workgroup bridge link. Using native vlan in root ap is
>> also working.
>>
>> root:
>>
>> interface Dot11Radio0.12
>>  encapsulation dot1Q 12 native
>>  no ip route-cache
>>  bridge-group 12
>> !
>> !
>> interface FastEthernet0.12
>>  encapsulation dot1Q 12 native
>>  no ip route-cache
>>  bridge-group 12
>> !
>> interface FastEthernet0.110
>>  encapsulation dot1Q 110
>>  no ip route-cache
>>  bridge-group 1
>> The rest of configurations remains the same.
>>
>> Best regards.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to