Hi Guys. Working on lab 6 I have some questions about it.
6.1 Monitor user; the solution showed in DSG seems valid. I did other combination, I created the user in AD and created a AD group called "Tacacs monitor", then added the user to this group. Finally created in ACS Database group mappings pointing the AD monitor group to the ACS monitor group and mapping the rest to default group. I supposed both possibilities are the same because the exercise does not tell us that the monitor user should be created statically in ACS. Thoughs?? 6.3: Maps; Although in real life I do the same like the DSG creating a Building with bigger dimensions than the original and then pushes the floor plans in right position, this exercise talks about the "dimensions of the building". Because it is not talking about the properties of the floor (only the type of the floor), I suppose that it should be valid to create a building with these dimensions and then create the floor, using the same dimensions and uncheck "maintain aspect ratio" to maintain the dimensions used for the floor and building and match the requirements of the exercise. More thoughs? About this, I always had a doubt about the positioning of the aps. I always have assumed that when the ap is mounted in a ceiling, the elevation information for the ap is down and 0 degrees; if it is on a table, up and 0 degrees and on a wal, l up or down and the degrees in function of the position selected. Am I right?? Because I did not found information that explains clearly this point and can be more important if you are using RTLS with a Location Appliance or MSE. Sorry for the huge number of e-mail sent in recent days. Best Regards.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
