I'm running drills on controller discovery and I'm hitting an issue that I can't deem to solve. I'm trying to use my 3560E as the DHCP server. It works fine just doing option 43. But when I try and throw in option 60 to target a specific AP model, it still advertises the controller IP to all models. I have verified this with a packet capture showing the DHCP option 43 info in the DHCP ACK packet from the switch.
My setup is a 3560E layer 3 switch with a 1131, 1142, 1242, and 2- 1252 APs. The DHCP config is shown below. I did try 2 different revs of code in case it was a bug (12.2.44 SE# and 12.2.58 SE#). When all 5 APs boot, they all get the option 43 info. Can anyone see if I'm doing something wrong? Has anyone else made this work as advertised in IOS? ip dhcp excluded-address 10.10.114.1 10.10.114.99 ip dhcp excluded-address 10.10.114.160 10.10.114.255 ip dhcp pool vlan114 network 10.10.114.0 255.255.255.0 default-router 10.10.114.1 option 43 hex f104.0a0a.700a dns-server 10.10.210.6 domain-name rensink.local option 60 ascii Cisco AP c1250 Jeff Rensink
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
